Advertisement
Connecting
Your Monitor
Installing the
Monitor Driver
Base Installation
1. Connect the power cord for your monitor to the power port on the back of the monitor.
2. Connect the signal cable to the video port on your computer, video board, video card, or
3. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the
4. Turn on your computer and monitor. If your monitor displays an image, installation is
Plug the power cord for the monitor into a nearby outlet.
graphics card.
pins on your adapter(Adapter not included). A PC-compatible computer does not need an
adapter.
complete.
Main > Setup > Connecting Your Monitor
Advertisement
