Volume Button - Samsung SyncMaster 913BM User Manual

Volume button[ ]

Adjust buttons [
Enter button [ ] /
SOURCE button
AUTO button
Power button [ ]
Power indicator
See PowerSaver
functions. For energy conservation, turn your monitor OFF when it is not needed or when
leaving it unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
POWER port
DVI IN port
RGB IN port
POWER on/off Switch
(option)
For working with a mixture of images such as text and
graphics.
4) Entertain : High Brightness
For watching motion pictures such as a DVD or VCD.
>>Click here to see an animation clip
When OSD is not on the screen, push the button to adjust
volume.
Adjust items in the menu.
]
Activates a highlighted menu item. /
Push the 'Source' and then select the Video signal while the
OSD is off. (When the Source button is pressed to change the
input mode, a message appears on the upper left of the screen
displaying the current mode -- analog or digital input signal.)
Note : If you select the Digital mode, you must connect your
monitor to the graphic card's port using the DVI cable.
Use this button for auto adjustment.
Use this button to turn the monitor on and off.
This light glows green during normal operation, and blinks green
once as the monitor saves your adjustments.
described in the manual for further information regarding power saving
Connect the power cord for your monitor to the power port on the back
of the monitor.
Connect the DVI Cable to the DVI port on the back of your monitor.
Connect the signal cable to the 15-pin, D-sub port on the back of your
monitor.
Use this button for turn the monitor on and off.