Samsung SyncMaster 713BM User Manual page 17

AUTO button
Power button [ ]
Power indicator
See PowerSaver
functions. For energy conservation, turn your monitor OFF when it is not needed or when
leaving it unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
POWER port
DVI IN port
RGB IN port
POWER on/off Switch
(option)
Kensington Lock
displaying the current mode -- analog or digital input signal.)
Note : If you select the Digital mode, you must connect your
monitor to the graphic card's port using the DVI cable.
Use this button for auto adjustment.
Turns the monitor On/Off.
This light glows green during normal operation, and blinks green
once as the monitor saves your adjustments.
described in the manual for further information regarding power saving
Connect the power cord for your monitor to the power port on the back
of the monitor.
Connect the DVI Cable to the DVI port on the back of your monitor.
Connect the signal cable to the 15-pin, D-sub port on the back of your
monitor.
Use this button for turn the monitor on and off.
The Kensington lock is a device used to physically fix the system
when using it in a public place.
(The locking device has to be purchased separately. )
For using a locking device, contact where you purchased it.