Advertisement
The screen shows
Check List
strange colors or
just black and
Q & A
white.
Self-Test Feature
Check
The screen
suddenly has
become
unbalanced.
The screen is out of
focus or OSD
cannot be adjusted.
The screen is
partially distorted.
LED is blinking but
no images on the
screen.
There are only 16
colors shown on the
screen. The screen
colors have
changed after
changing the video
card.
Is the screen displaying only
one color as if looking at the
screen through a cellophane
paper?
Have the screen colors become
strange after running a program
or due to a crash between
applications?
Has the video card been set
properly?
Have you changed the video
card or the driver?
Have you adjusted the
resolution or frequency to the
monitor?
The screen can be unbalanced due to the cycle of the video card
signals. Readjust Position by referring to the OSD.
Have you adjusted the
resolution or frequency on the
monitor?
Are there any magnetic
products such as an adapter,
speaker or a high voltage wire
near the monitor?
Is the frequency properly
adjusted when checking the
Display Timing on the menu?
Have the Windows colors been
set properly?
Has the video card been set
properly?
Check the signal cable connection.
Make sure the video card is fully
inserted in it's slot.
Reboot the computer.
Set the video card by referring to the
video card manual.
Adjust screen image position and
size using the OSD.
Adjust the resolution and frequency
at the video card.
(Refer to the
Preset Timing
Adjust the resolution and frequency
of the video card.
(Refer to the
Preset Timing
Enter the OSD and perform a
"Degauss".
Keep the monitor away from any
magnetic products.
Adjust the frequency properly by
referring to the video card manual
and the
Preset Timing
Modes.
(The maximum frequency per
resolution may differ from product to
product.)
For Windows XP/2000:
Set the colors properly at the
Control Panel, Display, Settings.
Set the video card by referring to the
video card manual.
Modes).
Modes).
Advertisement
