Table of Contents
Advertisement
Brightness button [ ]
Adjust buttons [
]
Enter button [ ] /
SOURCE button
AUTO button
Power button [ ]
Power indicator
See
PowerSaver
described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed, or
when leaving it unattended for long periods.
Rear
The configuration at the back of the monitor may vary from product to product.
POWER port
DVI IN (HDCP) port
RGB IN port
USB connection terminal UP (USB upstream port): Connect the
Kensington Lock
7) Dynamic Contrast
Dynamic Contrast is to automatically detect distribution of inputted
visual signal and adjust to create optimum contrast.
>> Click here to see an animation clip
When OSD is not on the screen, push the button to adjust brightness.
>> Click here to see an animation clip
Not available in MagicBright mode of Dynamic Contrast.
Adjust items in the menu.
Activates a highlighted menu item. /
Push the 'SOURCE/ ', then selects the video signal while the OSD is
off. (When the 'SOURCE/ ' button is pressed to change the input
mode, a message appears in the upper left of the screen displaying
the current mode -- Analog, Digital or USB input signal.)
If the monitor is used as a USB monitor (when connected via USB
cable), select USB mode by clicking the Enter icon.
Use this button for auto adjustment.
>> Click here to see an animation clip
Use this button for turning the monitor on and off.
This light glows blue during normal operation, and blinking blue once
as the monitor saves your adjustments.
Connect the power cord for your monitor to the power port on the back of
the monitor.
Connect the DVI Cable to the DVI IN (HDCP) port on the back of your
monitor.
Connect the signal cable to the 15-pin, D-sub port on the back of your
monitor.
the USB port of the computer with the USB cable.
DOWN (USB downstream port): Connect the
USB monitor and a USB device with the USB cable.
To use
DOWN (Downstream Port), you have to connect the
UP (Upstream Cable ) to the PC.
Make sure to use the USB cable supplied with this monitor to connect
the monitor's
UP port and your computer's USB port.
The Kensington lock is a device used to physically fix the system when
UP port of the monitor and
DOWN port of the
Advertisement
Table of Contents
