Advertisement
Advertisement
Table of Contents
Related Manuals for Nokia G-140W-C
Summary of Contents for Nokia G-140W-C
- Page 1 G-140W-C User Manual...
-
Page 2: Installation Precautions
Precautions Please read the user manual before installation and operation of the device. Please keep the User Manual for future reference. 1.1 Installation Precautions The device should only be installed by qualified personnel. Please check the voltage rating before connecting the power. It is recommended not to share the same power socket with other high power-rated devices (examples: Hairdryer, Refrigerator, Iron). -
Page 3: Laser Safety
1.3 Laser Safety Only qualified service personnel who are extremely familiar with laser radiation hazards should install or remove the fiber optic cables and fiber related units in this system. There may be invisible laser radiation at the fiber optic cable when the cable is removed from the connector. -
Page 4: Product Specifications
Small Office Home Office (SOHO) and enterprise environment providing a highly reliable broadband service. G-140W-C is equipped with a ITU-T G.984 compliant GPON optical interface, and provides the following user interfaces: Four auto sensing 10/100/1000M Ethernet interfaces for... -
Page 5: Installation
Installation Hardware Description 3.1.1 Front Panel LED Description： Color Status Description Power off POWER Green Solid Power on Green Blinking ONTself-test failed GPON is down or no link connected LINK GPON link between ONT and Green Solid OLT is operating normally ONU is NOT authorized Optical signal is present on GPON Link... - Page 6 Green Solid Wireless enabled Green Flashing Traffic on wireless interface Wireless is down or no link connected WLAN 5G Green Solid Wireless enabled Green Flashing Traffic on wireless interface No device connected At least one USB device is Green Solid USB 1,2 connected Traffic activity on at least on...
-
Page 7: Hardware Installation
RJ-45 10/100/1000M Ethernet Port: Connect Local LAN1/2/3/4 Network device (PC, STB) Factory Resetbutton. Press and hold the button for 10 RESET seconds or more to restore the device to the factory defaults. This button turnsWIFI WPS on. WLAN This button turnsWIFIon or off Power connector.Used to connect the external power POWER adapter... -
Page 8: Troubleshooting
Power Interface (POWER) Connect the power adapter provided in the package to the POWER connector of the G-140W-C. Connect the power adapter to the power socket. Press the ON/OFF button. Ensure the power LED indicator is on. -
Page 9: Hazardous Substances
Hazardous Substances Hazardous Substance Parts PBDE Circuit Modules × × ○ ○ ○ ○ Cables & Cable × ○ ○ ○ ○ ○ Assemblies Metal Parts × ○ ○ ○ ○ ○ Plastic and ○ ○ ○ ○ ○ ○ Polymeric parts ○... - Page 10 Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.