Sony MDR-AS600BT Reference Manual

4-548-971-34(1)
Wireless
Reference Guide GB
Stereo
CT
Headset
KR
Руководство по
RU
применению
MDR-AS600BT
©2015 Sony Corporation Printed in China
http://www.sony.net/
A
B
C
English
WARNING
To reduce the risk of electrical shock, do not open the
cabinet. Refer servicing to qualified personnel only.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
Do not expose the batteries (battery pack or batteries installed)
to excessive heat such as sunshine, fire or the like for a long
time.
TRA
REGISTERED No: ER36396/14
DEALER No: DA0096946/12
The BLUETooTH word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Sony
Corporation is under license.
The N Mark is a trademark or registered trademark of NFC
Forum, Inc. in the United States and in other countries.
Microsoft, Windows and Windows Vista are registered
trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
Mac and Mac oS are trademarks of Apple Inc., registered in the
U.S. and other countries.
iPhone is a trademark of Apple Inc., registered in the U.S. and
other countries.
other trademarks and trade names are those of their respective
owners.
Precautions
On BlueTOOTh communications
ˎ BLUETooTH wireless technology operates within a range of
about 10 m. Maximum communication range may vary
depending on obstacles (human body, metal, wall, etc.) or
electromagnetic environment.
ˎ The antenna is built into the unit as illustrated in the dotted
line (Fig. ). The sensitivity of the BLUETooTH
communications will improve by turning the direction of the
built-in antenna to the connected BLUETooTH device. When
obstacles are between the antenna of the connected device
and the built-in antenna of this unit, noise or audio dropout
may occur, or communications may be disabled.
ˎ BLUETooTH communications may be disabled, or noise or
audio dropout may occur under the following conditions.
ē There is a human body between the unit and the
BLUETooTH device.
This situation may be improved by placing the BLUETooTH
device facing the antenna of the unit.
ē There is an obstacle, such as metal or wall, between the
unit and the BLUETooTH device.
ē A device using 2.4 GHz frequency, such as a Wi-Fi device,
cordless telephone, or microwave oven, is in use near this
unit.
ˎ Because BLUETooTH devices and Wi-Fi (IEEE802.11b/g/n) use
the same frequency (2.4 GHz), microwave interference may
occur resulting in noise or audio dropout or communications
being disabled if this unit is used near a Wi-Fi device. In such
a case, perform the following.
ē Use this unit at least 10 m away from the Wi-Fi device.
ē If this unit is used within 10 m of a Wi-Fi device, turn off the
Wi-Fi device.
ē Install this unit and the BLUETooTH device as near to each
other as possible.
ˎ Microwaves emitting from a BLUETooTH device may affect
the operation of electronic medical devices. Turn off this unit
and other BLUETooTH devices in the following locations, as it
may cause an accident:
ē where inflammable gas is present, in a hospital, or a petrol
station
ē near automatic doors or a fire alarm
ˎ Do not use the unit on an airplane.
Radio waves may affect instruments, causing an accident due
to malfunction.
ˎ This unit supports security capabilities that comply with the
BLUETooTH standard to provide a secure connection when
the BLUETooTH wireless technology is used, but security may
not be enough depending on the setting. Be careful when
communicating using BLUETooTH wireless technology.
ˎ We do not take any responsibility for the leakage of
information during BLUETooTH communications.
ˎ Connection with all BLUETooTH devices cannot be
guaranteed.
ē A device featuring BLUETooTH function is required to
conform to the BLUETooTH standard specified by
Bluetooth SIG, Inc. and be authenticated.
ē Even if the connected device conforms to the above
mentioned BLUETooTH standard, some devices may not
be connected or work correctly, depending on the features
or specifications of the device.
ē While talking on the phone hands free, noise may occur,
depending on the device or communication environment.
ˎ Depending on the device to be connected, it may require
some time to start communications.
On charging the unit
ˎ This unit can be charged using USB only. Personal computer
with USB port is required for charging.
ˎ This unit cannot be turned on, nor can the BLUETooTH
function be used, during charging.
ˎ If you do not use the unit for a long time, the rechargeable
battery may not be able to keep sufficient charge. The
battery will be able to keep a charge properly after
repeatedly discharging and charging several times.
ˎ If you store the unit for a long time, charge the battery once
every half year to prevent over-discharge.
ˎ If the length of time you can use the unit became extremely
short, the rechargeable battery should be replaced with a
new one. Please contact your nearest Sony dealer for a
battery replacement.
Note on static electricity
ˎ Static electricity accumulated in the body may cause mild
tingling in your ears. To minimize the effect, wear clothes
made from natural materials.
If the unit does not operate properly
ˎ Reset the unit (Fig. ).
Push the RESET button with a pointed object, such as a pin,
until you feel a click. The unit will be reset. Pairing
information is not deleted.
ˎ If the problem persists even after the resetting operation
above, initialize the unit as follows.
Push the RESET button with a pointed object, such as a pin,
for more than 15 seconds. The indicator (blue) flashes 4 times,
and the unit is reset to the factory settings. All pairing
information is deleted.
ˎ After the unit is initialized, it may not connect to your iPhone
or computer. In this case, delete the pairing information of
the unit from the iPhone or computer, and then pair them
again.
Splash proof performance
The splash proof specifications 1) of this unit are equivalent to
IPX4 in IEC 60529 "Degrees of protection against ingress of
2)
water (IP Code)", which specifies the degree of protection
provided against the entry of water. However, the unit
cannot be used in water. Unless the unit is used correctly,
water may get into the unit and cause fire, electrocution, or
malfunctions. Note the following cautions carefully and use
the unit correctly.
liquids that the splash proof performance
specifications apply to
Applicable: Fresh water, tap water, perspiration
Not applicable: Liquids other than those above
(examples: soapy water, detergent water, water with bath
agents, shampoo, hot spring water, pool water, seawater,
etc.)
1) Make sure that the micro-USB port cover is closed securely
when you use the unit.
IPX4 (degree of protection against splashing water):
2)
Protected against water splashing from any direction.
Splash proof performance of the unit is based on Sony
measurements under the conditions described above. Note
that malfunctions as a result of water immersion caused by
misuse by the customer are not covered by the warranty.
To maintain splash proof performance
Note the following cautions carefully and use the unit
correctly.
ˎ Do not drop the unit or expose it to mechanical shock.
Doing so may deform or damage the unit, resulting in
deterioration of splash proof performance.
ˎ Do not put the unit in water or use it in a humid place such
as a bathroom.
ˎ The micro-USB port cover is important for maintaining
splash proof performance. Make sure the micro-USB port
cover is closed securely when you use the unit. If the cover
has any foreign objects on it or is not completely closed,
splash proof performance cannot be maintained. In
addition, water may get into the unit and cause
malfunctions.
ˎ Do not splash water forcibly against the cylindrical part
from which sound is emitted. Doing so may deteriorate the
splash proof performance of the unit.
ˎ Wipe off with a soft dry cloth any water that gets on the
unit. If water remains in the earbud holes, the sound may
seem low or not be audible at all. In this case, remove the
earbuds, face the sound conduit downward, and shake the
sound conduit a couple of times (Fig. ).
ˎ Do not leave the unit with water on it in cold places as the
water may freeze. In order to avoid malfunctions, make
sure that you wipe off water after use.
Others
ˎ Do not place this unit in a place exposed to humidity, dust,
soot or steam, subject to direct sunlight, or in a car waiting at
a traffic signal. It may cause a malfunction.
ˎ Using the BLUETooTH device may not function on mobile
phones, depending on radio wave conditions and location
where the equipment is being used.
ˎ If you experience discomfort after using the BLUETooTH
device, stop using the BLUETooTH device immediately.
Should any problem persist, consult your nearest Sony dealer.
ˎ Listening with this unit at high volume may affect your
hearing. For traffic safety, do not use this unit while driving or
cycling.
ˎ Do not put weight or pressure on this unit as it may cause the
unit to deform during long storage.
ˎ Do not subject the unit to excessive shock.
ˎ Clean the unit with a soft dry cloth.
ˎ Do not use the unit with the cord wound around your neck.
Doing so may lead to suffocation.
ˎ Do not sleep while wearing the unit. The cord could wind
around your neck and cause suffocation while you sleep.
ˎ If you have any questions or problems concerning this unit
that are not covered in this manual, please consult your
nearest Sony dealer.
optional replacement earbuds and arc supporters can be
ordered from your nearest Sony dealer.

Specifications

General
Communication system: BLUETooTH Specification version 3.0
Output: BLUETooTH Specification Power Class 2
Maximum communication range: Line of sight approx. 10 m 1)
Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method: FHSS
Compatible BlueTOOTh profiles 2) :
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
HFP (Hands-free Profile)
HSP (Headset Profile)
Supported Codec : SBC , AAC
3) 4) 5)
Supported content protection method: SCMS-T
Transmission range (A2DP): 20 Hz - 20,000 Hz (Sampling
frequency 44.1 kHz)
Included items:
Wireless stereo headset (1)
Micro-USB cable (approx. 50 cm) (1)
Long Hybrid silicone rubber earbuds (SS/S/M/L 2 each)
Arc supporters (S/M/L 2 each)
Reference Guide (this sheet) (1)
Quick Start Guide (1)
The actual range will vary depending on factors such as
1)
obstacles between devices, magnetic fields around a
microwave oven, static electricity, reception sensitivity,
antenna's performance, operating system, software
application, etc.
2) BLUETooTH standard profiles indicate the purpose of
BLUETooTH communications between devices.
Codec: Audio signal compression and conversion format
3)
Subband Codec
4)
Advanced Audio Coding
5)
Wireless stereo headset
Power source:
DC 3.7 V: Built-in lithium-ion rechargeable battery
DC 5 V: When charged using USB
Mass: Approx. 21 g (not including the arc supporters)
Operating temperature: 0 °C to 40 °C
Rated power consumption: 0.6 W
usage hours:
When connecting via the BLUETooTH device
Music playback time: Max. 8.5 hours
Communication time: Max. 8 hours
Standby time: Max. 250 hours
Note: Usage hours may be shorter depending on the
Codec and the conditions of use.
Charging time:
Approx. 2.5 hours
Note: Charging hours may be different depending on the
conditions of use.
Charging temperature: 5 °C to 35 °C
Receiver
Type: Closed, Dynamic
Driver units: 9 mm
Frequency response: 20 Hz - 20,000 Hz
Microphone
Type: Electret condenser
Directivity: omni directional
effective frequency range: 100 Hz - 4,000 Hz
System requirements for battery
charge using uSB
Personal Computer with pre-installed with any of the following
operating systems and USB port:
Operating Systems
(when using Windows)
Windows ® 8.1 / Windows ® 8.1 Pro
® ®
Windows 8 / Windows 8 Pro
®
Windows 7
Home Basic / Home Premium / Professional / Ultimate
®
Windows Vista (Service Pack 2 or later)
Home Basic / Home Premium / Business / Ultimate
(when using Mac)
Mac oS X (version.10.3 or later)
Design and specifications are subject to change without notice.
繁體中文
警告
為減少觸電的危險，請勿打開裝置外殼。請只委託合格的人員
進行維修。
請勿將本系統安放在書櫥或壁櫥等狹窄封閉處。
請勿將電池（安裝的電池組或電池）⾧時間暴露在如陽光或⽕
源等類似過熱的地⽅。
經型式認證合格之低功率射頻電機，非經許可，公司、商號或
使用者均不得擅自變更頻率、加大功率或變更原設計之特性及
功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經
發現有干擾現象時，應立即停用，並改善至無干擾時⽅得繼續
使用。前項合法通信，指依電信法規定作業之無線電通信。低
功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射
性電機設備之干擾。
BLUETOOTH字樣與商標為Bluetooth SIG, Inc.所擁有；Sony
Corporation針對此類標示的使用已獲得授權。
N字標示為NFC Forum, Inc.在美國和其他國家的商標或註冊商
標。
Microsoft、Windows及Windows Vista是Microsoft
Corporation在美國及/或其他國家的註冊商標或商標。
Mac和Mac OS是Apple Inc.（蘋果電腦公司）在美國以及其他
國家註冊的商標。
iPhone是Apple Inc.在美國和其他國家的註冊商標。
其他商標和商標名稱為其各自所有人擁有。
預防措施
關於BLUETOOTH通訊
ˎ BLUETOOTH無線技術可在約10 m的範圍內運作。最大通訊範
圍可能依障礙物（人體、金屬、牆壁等）或電磁環境不同而
定。
ˎ 天線內建在裝置中，如圖中虛線所示（圖  ）。將內建天
線朝連接的BLUETOOTH裝置⽅向轉動可以增加BLUETOOTH通訊
的敏感度。若連接裝置的天線與本機內建天線之間有障礙
物，可能會出現雜訊或音訊中斷的情況，也可能無法使用通
其他商標和商標名稱為其各自所有人擁有。
預防措施
關於BLUETOOTH通訊
ˎ BLUETOOTH無線技術可在約10 m的範圍內運作。最大通訊範
圍可能依障礙物（人體、金屬、牆壁等）或電磁環境不同而
定。
ˎ 天線內建在裝置中，如圖中虛線所示（圖  ）。將內建天
線朝連接的BLUETOOTH裝置⽅向轉動可以增加BLUETOOTH通訊
的敏感度。若連接裝置的天線與本機內建天線之間有障礙
物，可能會出現雜訊或音訊中斷的情況，也可能無法使用通
訊功能。
ˎ 在以下情況中，BLUETOOTH通訊可能無法使用，或者會出現
雜訊或音訊中斷的情況。
ē 本機與BLUETOOTH裝置之間有人體阻隔。
將BLUETOOTH裝置面對本機天線放置即可改善此情況。
ē 本機和BLUETOOTH裝置間有金屬或牆面等障礙物。
ē Wi‑Fi裝置、無線電話或微波爐等2.4 GHz頻率的裝置正在
本機附近使用。
ˎ 由於BLUETOOTH裝置和Wi‑Fi（IEEE802.11b/g/n）使用相同
頻率（2.4 GHz），若本機在Wi‑Fi裝置附近使用，可能會發
生微波干擾而導致雜訊、音訊中斷或是通訊功能無法使用等
情況。在此情況下，請執行以下步驟。
ē 請在距離Wi‑Fi裝置至少10 m的地⽅使用本機。
ē 若要在距離Wi‑Fi裝置10 m內的地⽅使用本機，請關閉
Wi‑Fi裝置。
ē 將本機和BLUETOOTH裝置安裝在盡量靠近彼此的地⽅。
ˎ 從BLUETOOTH裝置放射出的微波可能會影響電子醫療裝置的
操作。在以下地點請關閉本機和其他BLUETOOTH裝置，以免
造成意外：
ē 有易燃性瓦斯的地點，如醫院或加油站
ē 靠近自動門或⽕警警鈴的地⽅
ˎ 請勿在飛機上使用本機。
無線電波可能影響儀器，並造成故障而導致意外。
ˎ 本機支援符合BLUETOOTH標準的安全功能，以便在使用
BLUETOOTH無線技術時提供安全的連接，但依設定不同而
定，安全性可能會不足。使用BLUETOOTH無線技術進行通訊
時，請務必小心。
ˎ 對於BLUETOOTH通訊期間的資訊外洩，本公司不負有任何責
任。
ˎ 不保證與所有BLUETOOTH裝置均能連接。
ē 有BLUETOOTH功能的裝置必須符合由Bluetooth SIG, Inc.
指定的BLUETOOTH標準並取得認證。
ē 即使連接的裝置符合上述的BLUETOOTH標準，依裝置功能
或規格不同而定，部分裝置仍可能無法正確連接或運作。
ē 使用手機的免持聽筒通話時，依裝置或通訊環境不同而
定，可能會產生雜訊。
ˎ 依要連接的裝置不同而定，可能需要一些時間才能開始通
訊。
關於為本機充電
ˎ 僅可使用USB為本機充電。需要帶有USB連接埠的個人電腦才
能充電。
ˎ 充電期間內本機無法開機，也無法使用BLUETOOTH功能。
ˎ 若您⾧時間未使用本機，充電電池可能無法維持足夠電量。
電池要重複放電及充電數次後，才能適當地維持電量。
ˎ 若您要⾧時間存放本機，請每半年讓電池充電一次，避免過
度放電。
ˎ 若本機可供使用時間變得非常短，就應該更換新的充電電
池。請聯絡附近的Sony經銷商更換電池。
靜電注意事項
ˎ 機體內所累積靜電可能會對您的耳朵造成輕微刺痛。若要將
此影響降至最低，請穿著天然材質製造的衣物。
本機無法正常運作的情況
ˎ 請重設本機（圖）。
請以尖銳物品按下RESET按鈕（例如別針），直到聽到喀嗒
一聲。本機將會重設。沒有刪除配對資訊。
ˎ 若經過以上重設操作後問題仍然存在，請按下列步驟進行初
始化。
請以尖銳物品按下RESET按鈕（例如別針）15秒鐘以上。指
示燈（藍色）將閃爍4次，此時本機將重設回出廠設定。所
有配對資訊皆被刪除。
ˎ 本機初始化後，可能無法連線至iPhone或電腦。在這種情況
下，請由iPhone或電腦刪除本機配對資訊，然後再次配對。
防濺效果
本機的防濺規格 1) 相等於IEC 60529"防水滲透等級（IP代
碼）"的IPX4 2) ，此代碼可說明所提供的防水滲入等級。但
本機無法於水中使用。若未正確使用，可能會導致水分進
入機體，而造成著⽕、觸電或故障等情況。請仔細留意下
列警告事項，並正確使用本機。
防濺效果規格所適用的液體種類
適用：淡水、自來水、汗水
不適用：非上述之液體（例如：肥皂水、清潔劑水、含
沐浴劑的水、洗髮精、溫泉水、泳池水、海水等）
1） 使用本機時請確定micro‑USB連接埠保護蓋已緊閉。
2） IPX4（防潑水等級）：可提供全⽅位的防潑水效果。
本機的防濺效能是以Sony於上述情況所進行的測量為基
準。請注意，若由於使用者的使用⽅法錯誤導致水分滲入
而造成故障，則不在保固範圍內。
保持防濺效果
請仔細留意下列警告事項，並正確使用本機。
ˎ 請勿摔落本機，或將本機暴露於機械震動中。如此可能造
成本機變形或損壞，導致防濺效果降低。
ˎ 請勿將本機置於水中或在浴室等潮濕的環境中使用。
ˎ micro‑USB連接埠保護蓋對於維持防濺效果十分重要。使
用本機時請確定micro‑USB連接埠保護蓋已緊閉。若保護
蓋上有外來物體或未完全蓋上，則無法維持防濺效果。此
外還有可能造成水分滲入機體，導致故障。
ˎ 請勿朝發聲的圓柱型零件用力潑水。如此可能會降低機體
的防濺效果。
ˎ 請以柔軟的乾布擦拭本機上的水分。若水分殘留於耳塞孔
內，則音量會減弱或完全無法聽見。在此狀況下，請拆下
耳塞，將聲音導管朝下並甩動數次（圖）。
ˎ 請勿將任何有水分的零件置於寒冷場所，以免水分結冰。
為避免故障，請確定於使用後將水分擦乾。
其他資訊
ˎ 請勿將本機放置在暴露於濕氣、灰塵、油煙或蒸汽，受陽光
直射的地⽅或等待紅綠燈的車內。這樣可能會引起故障。
ˎ 依無線電波情況和裝備正在使用的地點不同而定，BLUETOOTH
裝置可能無法在手機上作用。
ˎ 若您在使用BLUETOOTH裝置後感到不適，請立即停止使用
BLUETOOTH裝置。萬一問題持續，請聯絡附近的Sony經銷
商。
ˎ 使用本機時音量很大可能會影響您的聽力。為確保交通安
全，請勿在開車或騎腳踏車時使用本機。
ˎ 請勿將重物放置在本機上或施加壓力，因為⾧時間存放時可
能會造成本機變形。
ˎ 請勿讓本機受到嚴重撞擊。
ˎ 請使用柔軟的乾布清潔本機。
ˎ 使用本機時請勿讓耳機線環繞頸部。這樣可能會造成窒息。
ˎ 睡眠時請勿戴上本機。耳機線可能會環繞頸部，在睡眠時造
成窒息。
ˎ 若您有任何關於本機的疑問或問題未在本說明書中涉及，請
聯絡附近的Sony經銷商。
可向附近的Sony經銷商訂購選購的替換用耳塞及弧形支架。
規格
一般資訊
通訊系統：BLUETOOTH規格版本3.0
輸出：BLUETOOTH規格Power Class 2
最大通訊範圍：直視距離約10 m內 1）
頻段：2.4 GHz波段（2.4000 GHz ‑ 2.4835 GHz）
模組⽅式：FHSS
相容的BLUETOOTH模式 2） ：
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
HFP (Hands‑free Profile)
HSP (Headset Profile)
支援的Codec 3） ：SBC 4) 、AAC 5)
支援的內容保護法：SCMS‑T
傳輸範圍（A2DP）：20 Hz ‑ 20000 Hz（採樣頻率44.1 kHz）
隨附項目：
無線立體聲耳機（1）
Micro‑USB連接線（約50 cm）（1）
⾧型混合矽膠耳塞（SS/S/M/L各兩個）
弧形支架（S/M/L各兩個）
參考指南（本頁）（1）
快速入門指南（1）
1） 實際範圍將會依裝置間的障礙物，微波爐周圍的磁場、靜
電、接收敏感度、天線效能、操作系統、軟體應用程式等因
素而有所不同。
2） BLUETOOTH標準檔案說明裝置間BLUETOOTH通訊的目的。
3） Codec：音訊壓縮和轉換格式
4） 子頻帶Codec
參考指南（本頁）（1）
快速入門指南（1）
1） 實際範圍將會依裝置間的障礙物，微波爐周圍的磁場、靜
電、接收敏感度、天線效能、操作系統、軟體應用程式等因
素而有所不同。
2） BLUETOOTH標準檔案說明裝置間BLUETOOTH通訊的目的。
3） Codec：音訊壓縮和轉換格式
子頻帶Codec
4）
5） 進階音訊編碼
無線立體聲耳機
電源：
DC 3.7 V：內建鋰離子充電電池
DC 5 V：使用USB充電時
質量：約21 g（不含弧形支架）
操作溫度：0 ℃至40 ℃
額定功耗：0.6 W
使用時數：
當經由BLUETOOTH裝置連線使用時
音樂播放時間：最高8.5小時
通訊時間：最高8小時
待機時間：最高250小時
注意事項：使用時間可能會較短，視Codec和使用情況而
定。
充電時間：約2.5小時
注意事項：充電時間可能視使用情況而有所不同。
充電溫度：5 ℃至35 ℃
接收器
型式：封閉式，動態
激勵單元：9 mm
頻率響應：20 Hz ‑ 20000 Hz
麥克風
型式：駐極體電容式
指向性：全指向
有效頻率範圍：100 Hz ‑ 4000 Hz
使用USB為電池充電的系統要求
預先安裝以下作業系統和USB埠的個人電腦：
作業系統
（使用Windows時）
Windows® 8.1 / Windows® 8.1 Pro
Windows® 8 / Windows® 8 Pro
Windows® 7
Home Basic / Home Premium / Professional / Ultimate
Windows Vista®（Service Pack 2或更新的版本）
Home Basic / Home Premium / Business / Ultimate
（使用Mac時）
Mac OS X（10.3或更新的版本）
設計和規格若有變更，恕不另行通知。