Samsung 173P Plus, 193P Plus Owner's Manual page 42

The screen shows
strange colors or just
black and white.
The screen suddenly
has become
unbalanced.
The screen is out of
focus.
There are only 16
colors shown on the
screen.
The screen colors
have changed after
changing the video
card.
There is a message
that reads
"Unrecognized
monitor, Plug & Play
(VESA DDC) monitor
found".
Check when
MagicTune does not
function properly.
Is the monitor
connected using the
DVI cable?
Is the screen displaying
only one color as if
looking at the screen
through a cellophane
paper?
Have the screen colors
become strange after
running a program or
due to a crash between
applications?
Has the video card
been set properly?
Have you changed the
video card or the driver?
Have you adjusted the
resolution or frequency
to the monitor?
The screen can be unbalanced due to the cycle of the video card signals.
Readjust position by referring to the OSD.
Have you adjusted the
resolution or frequency
on the monitor?
Have the Windows
colors been set
properly?
Has the video card
been set properly?
Have you installed the
monitor driver?
See the video card
manual to see if the
Plug & Play (VESA
DDC) function can be
supported.
MagicTune feature is
found only on PC (VGA)
with Window OS that
supports Plug and Play.
If the monitor does not respond,
activate the source conversion
feature located on the front of the
monitor, or try moving the mouse or
pressing a key on the keyboard
again.
You may get a blank screen if you
boot the system before you connect
the DVI cable, or disconnect and
then reconnect the DVI cable while
the system is running as certain
types of graphic cards do not send
out video signals.
Connect the DVI cable and then
reboot the system.
Check the signal cable connection.
Make sure the video card is fully
inserted in it's slot.
Reboot the computer.
Set the video card by referring to the
video card manual.
Adjust screen image position and
size using the OSD.
Adjust the resolution and frequency
at the video card.
(Refer to the Preset Timing
Adjust the resolution and frequency
of the video card.
(Refer to the Preset Timing
Windows ME/2000/XP:
Set the colors properly at the
Control Panel → Display →
Settings.
Set the video card by referring to the
video card manual.
Install the monitor driver according
to the Driver Installation
* To check whether your PC is
available for MagicTune feature,
follow the
steps below (When Windows is
XP);
Control Panel -> Performance and
Maintenance -> System ->
Hardware -> Device Manager ->
Monitors -> After deleting Plug and
Play monitor, find 'Plug and Play
Modes).
Modes).
Instructions.