Table of Contents
Advertisement
User Controls
9. PRE-CH
10. CH
11. SOURCE
12. INFO
13. EXIT
14. Up-Down , Left-Right Buttons
15. P.MODE, M/B
16. STILL
17. BBE (Barcus-Berry Electronics)
18. MTS
19. PIP
20. SOURCE
21. SIZE
22. SWAP
This button is used to return to the immediately previous channel.
In TV mode, selects TV channels.
For more information, refer to Direct-Access Features >
Push the button, Selects the Video source changes.
Shows a video source, current channel number, picture mode, sound mode, Caption On/Off and
V-chip On/Off on the upper right corner of the screen.
Exits from the menu screen. Exits from the PIP screen.
Moves from one menu item to another horizontally, vertically or adjusts selected menu values.
When you press this button, current sound mode is displayed on the lower center of the screen.
TV / AV / S-Video / DTV Mode : P.MODE( Picture Mode )
Then push button again to circle through available preconfigured modes.
( Movie
Dynamic
Standard
PC / DVI Mode : M/B (MagicBright™)
Then push button again to circle through available preconfigured modes.
( Text
Internet
Entertain
When you press this button, current sound mode is displayed on the lower center of the screen.
Press the button once to freeze the screen. Press it again to unfreeze.
Recreates the natural sound and improves sound clarity through boosting high and low range
frequencies. As a result high sounds are clearer, brilliant and finely detailed while low sounds are
tight, well-defined and harmonically rich.
You can select the MTS (Multichannel Television Stereo) mode.
Audio Type
Mono
Stereo
FM Stereo
SAP
Push the PIP button to PIP screen ON.
Push the button, the PIP window's signal source changes.
Adjusts the PIP image size in PIP mode.
Swapping the contents of the PIP and main image. The image in the PIP window will appear on
the main screen, and the main screen image will appear in the PIP window.
Channel
Custom )
Custom )
MTS/S_Mode
Mono
Mono
Stereo
Mono
SAP
Default
Manual Change
Mono
Advertisement
Table of Contents
