Note
It is recommended that you perform the complete
Adapt Voice session at least once to achieve the
maximum benefit of this feature. If a partial
adaptation is performed, you can always return later
and resume the process from the halfway point.
Resetting Voice Recognition
1.
Press
Menu > Tools > Voice Service > Set
(left softkey)
> Train Mode
2.
Select
Reset Voice
displays a reset dialog.)
3.
Press
(left softkey) to reset the voice recognition
OK
parameters or
Cancel
Using Choice Lists
If your phone is not confident it has recognized a name
or number correctly, it might display a choice list and
prompt you with "
Call?
the list. To confirm the choice, say "
next choice, say "
." You can also select the correct
No
choice using your keypad. To cancel the command,
say "
," or to say the name or number again, say
Cancel
"
."
Repeat
114
Section 2I. Voice Services
.
and press
. (The phone
to exit.
" followed by the first choice on
," or to hear the
Yes
Enabling and Disabling Choice Lists
You can customize whether the Voice Recognition
feature displays either a list of top voice recognition
choices or automatically dials the first number without
displaying a choice list.
To enable or disable choice lists for Digit Dial:
1.
Press
Menu > Tools > Voice Service > Set
.
> Choice Lists
2.
Select
or
Automatic
Send a Message
Use a single voice command to launch messaging on
your phone and specify a recipient for the message.
To send a text message:
1.
Press and hold
2.
Say "
Send Text Message
(left softkey)
and press
Always Off
.
."
.