Samsung SPH-n400 Series User Manual page 91

n400bmc version 2.book Page 81 Wednesday, May 14, 2003 3:30 PM
Unlocking the phone
1. In standby mode, press
enter the lock code.
2. Enter the 4-digit lock code and your phone unlocks.
Placing calls in Lock Mode
You can place emergency calls using confidential numbers
that you've programmed into memory while in lock mode.
• To call an emergency or confidential number, enter the
number and then press
Changing the Lock Code
The default lock code for your phone is generally the last four
digits of your phone number. You can enter a personal lock
code and later change the lock code as often as you like.
1. Press
lock code.
2. Press for Change Lock. The screen prompts you
to enter a new lock code.
3. Enter a new, 4-digit lock code via the keypad and
press .
4. Re-enter the new lock code and press
the new lock code.
Note: Your phone does not allow viewing of the lock code
unless you know the lock code (this is for obvious
security reasons). So, if you change the lock code, be
sure to write down or memorize the new code.
Restricting the use of your phone
This feature allows you to restrict the use of your phone.
or . You're prompted to
.
for Security. Enter your current
again to save
81