Using One/Two/Three Touch Speed Dialing
With this feature, you can automatically call Speed Dial entries
using one key press for locations 1-9, two key presses for
locations 10-99, or three key presses for locations 100-300.
To use
One-Touch Dialing
Press and hold the appropriate key for a few seconds. The display
confirms that the number has been dialed when it shows "Calling".
To use Two-Touch Dialing for Speed Dial locations 10-99:
1. Press the first digit.
2. Press and hold the second digit for a few seconds. The
display confirms that the number has been dialed when it
shows "Calling".
To use Three-Touch Dialing for Speed Dial locations 100-300:
1. Press the first digit.
2. Press the second digit.
3. Press and hold the third digit for a few seconds. The
display confirms that the number has been dialed when it
shows "Calling".
Dialing Options
Dialing options are displayed when you enter numbers using the keypad.
To select an option press
corresponds with the desired choice.
(1) Talk is used to dial the phone number. (If you are
roaming and have the Call Guard feature activated, you must
then press
Guard On:" on page 49.
(2) Save to save the phone number in your Internal
Phone Book. See "Finding Internal Phone Book Entries" on
page 73.
(3) Find is used to locate and display Internal Phone Book
entries that contain the numbers entered. See "Finding
Internal Phone Book Entries" on page 73.
(4) Hard Pause is used to insert a hard pause.
(5) 2 Second Pause to insert a 2-second pause.
Section 2: Understanding Your PCS Phone
2A: Your PCS Phone - The Basics
for Speed Dial locations 1-9:
and the number on the keypad that
. See "To Place Roaming Calls With Call
20