Using The Audio Mix Function - Pioneer AVIC-W8400NEX Operation Manual

Using the audio mix function

You can output the audio mixing AV source and an application for iPhone or
smartphone when AppRadio Mode + is used.
NOTES
• Depending on the application or AV source, this function may not be available.
• When the audio mix function is set to on, the voice guidance of the navigation system is not output.
To output the voice guidance of the navigation system, set the audio mix function to off.
1
Start up the AppRadio Mode +.
2
Press VOL (+/-).
The audio mix menu will be displayed on the screen.
NOTES
• The audio mix menu is displayed for four seconds. If the screen disappears, press VOL (+/-) again. The
screen reappears.
• The AV operation screen and the Application screen can be switched by pressing
Touch to mute. Touch again to cancel mute.
Sets whether to switch the sound mix function on or off.
• Left tab:
The audio mix function is enabled (mix on) and the App volume is displayed.
• Right tab:
The audio mix function is disabled (mix off ). This is not displayed on the AV
operation screen.
Adjusts the application audio volume.
• The App volume is not displayed when the right tab is selected.
• You cannot adjust the volume of the main sound on the screen. Press VOL (+/-)
to adjust the volume of the main sound.
TIP
The AV operation screen and the Application screen can be switched by pressing
- 101 -
.
.