Table of Contents
Advertisement
[Original]
Refers to the original language in which the
disc was recorded.
[Other]
To select another language, press numeric
buttons and then ENTER to enter the
corresponding 4-digit number according to
the language code list on the page 27. If you
enter the wrong language code, press CLEAR.
[Off (for Disc Subtitle)]
Turn off Subtitle.
DISPLAY
TV Aspect
Select which screen aspect to use based on the
shape of your TV screen.
[4:3]
Select when a standard 4:3 TV is connected.
[16:9]
Select when a 16:9 wide TV is connected.
Display Mode
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
[Letterbox]
Displays a wide picture with bands on the
upper and lower portions of the screen.
[Panscan]
Automatically displays the wide picture on the
entire screen and cuts off the portions that do
not fit. (If the disc/file is not compatible with
Pan Scan, the picture is displayed at Letterbox
ratio.)
DH3140S-F0_AZAFLLK_ENG_5470.indd 15
AUDIO
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this effect.
Vocal
Select [On] to mix karaoke channels into normal
stereo.
This function is effective for multi-channel karaoke
DVDs only.
5.1 Speaker Setup
Make the following settings for the built-in 5.1
channel surrounds decoder.
1. Press SETUP.
w/s
2. Use
to select AUDIO menu and then
press
d
.
w/s
3. Use
to select [5.1 Speaker setup] menu
d
and then press
.
4. Press ENTER
The [5.1 Speaker setup] appears.
5. Use a/d to select the desired speaker.
6. Adjust options using w/s/a/d buttons.
7. Press BACK to confirm your selection. Return to
the previous menu.
[Speaker]
Select a speaker that you want to adjust.
,
Note
Certain speaker settings are prohibited by
the Dolby Digital licensing agreement.
[Size]
Since the speaker settings are fixed, you cannot
change the settings.
System Setting
15
2014-06-10
1:48:49
3
Hide quick links:
Advertisement
Table of Contents
