Sony XPERIA X Performance SOV33 Settings Manual

Setting Guide
Introduction
TM
Thank you for buying the "Xperia X Performance" (simply called the "product"
from here on).
In this guide, settings and precautions for using the product are described.
● Basic operation ● Transferring data from au
Describes the basic operations. Setting Menu
Import/export data to/from the
● Initial settings
product using microSD memory card
When "ようこそ (Welcome)" appears
or au Smart Pass server.
after the product is powered on,
make initial settings. ● Sending contacts
Send contacts to another phone.
● E-mail setting
Make initial settings for @ezweb. ● Saving battery power
ne.jp etc.
Save battery power using the quick
setting panel or the quick setting
Making a call
●
tools.
Describes how to make a call.
● Receiving a call
Describes how to receive a call.
Company names and product names referred to in this manual are trademarks or
registered trademarks of respective companies.
The TM, ® marks may be omitted in this manual.
Screen illustrations shown in this manual may look different from the actual screens.
In some cases, upper or lower part of a screen may be omitted.
May 2016, 1st Edition
Sold by: KDDI CORPORATION, OKINAWA CELLULAR
TELEPHONE COMPANY
1303-0470.1 Manufactured by: Sony Mobile Communications Inc.
Using Wi-Fi ® network selection settings
Select from detected Wi-Fi ® network to set.
To select a protected Wi-Fi ® network, you need to enter a security key.
1 2
Select Wi-Fi ® Enter a password
network (security key) →
[CONNECT]
Setting Wi-Fi ® network manually
Add Wi-Fi ® network manually.
Check network name (SSID), authentication type, etc. in advance.
If security is set, you need to enter a security key.
1 2
[Add another Select network name
network] (SSID) and security
type → Enter a
password (security
key) as required →
[SAVE] → [NEXT]
Basic operation
For detailed descriptions of operations, refer to the "Basic Manual"
(Japanese) app installed on the product or "取扱説明書 （詳細版） (Full
Instruction Manual)" (Japanese) available on the au homepage.
OPower key/Power Lock key/
Status bar
Fingerprint sensor
Current status and
notification icons
Power ON
are displayed.
Press and holdOfor over 1 second.
Screen Lock
PressOwhile the screen displayed. The
backlight turns off and screen lock is activated
(avoiding the keys or touch screen from false
operations).
Unlocking Screen Lock
The lock screen appears when turning the power
on or the backlight on by pressingO. Swipe
(flick) the screen up to cancel the screen lock.
Register fingerprints to cancel the screen lock
by touching O.
App key
Tap to display the apps screen.
n History key
Tap to display recently-used apps in the
thumbnail list and activate or end them from
the list.
h Home key
Tap to display the Home screen.
b Back key
Tap to return to the previous screen.
Display (Touch panel)
Operate directly touching with your finger.
■ STEP 2: Setting up a Google account
Set up a Google account so that you can synchronize with Gmail, contacts of online service, calendar, etc.
●To set online service, make sure that data communication is enabled. Check that
● If you set up a Google account, you can use Google apps such as "Gmail", "Google Play" or "Hangouts". Gmail's mail address "(user name) @gmail.com" is automatically created from
the user name set with a Google account. To create an account, you are required to register "First name" and "Last name".
1 2 3 4
[No thanks] *１ [Or create a new Enter "First name", Enter a user
→ [NEXT] account] *2 "Last name" name → [NEXT]
→ [NEXT]
8 9
*1 To copy Google account etc. from
the other device, operate [Copy your
Google Accounts, apps, and data
from your other device] → [NEXT]
and then follow onscreen instructions.
*2 If you have a Google account, enter
the mail address and then follow the
onscreen instructions.
*3 Checking registration of username
starts. If a username is unavailable,
an entry screen for prompting
another user name appears.
Confirm the Google Set purchase
*4 The phone number of your au Nano
IC Card 04 is entered automatically
services settings → settings for Google
When you enter another phone
[NEXT] Play as required →
number, enter the notified verification
[CONTINUE]
code and then tap "NEXT".
■ Opening Notification panel
If any notification icons are displayed on the left
Notification
side of the status bar, slide down the status bar
panel
to open the Notification panel. You can check
details of notification icons, start corresponding
apps, etc.
Slide the status bar down with two fingers or slide
the Notification panel down to display the quick
setting panel. You can set on/off of the functions.
■ Touch panel operations
Tap/Double-tap Long-touch
Tap: Gently touch Keep touching an item
a screen and then with your finger.
immediately release
your finger.
Double tap: Touch the
same position twice.
Slide Flick (swipe)
While your finger is
Operate the screen
gently touching the
by quickly moving
screen, trace it to the
(flicking) your finger
desired direction to
up/down or right/left.
move over.
Pinch Drag
Touch the screen with Keep touching an item
two fingers and widen or icon, trace it to the
(pinch-out) or narrow desired direction to
(pinch-in) the fingers' move.
distance.
■
Displaying menu
There are two types for displaying the screen menu; tapping " " and long-
touching an input field or item.
appears on the status bar or the product is connected to a Wi-Fi ® network.
5 6 7
Enter a password Confirm the phone [I AGREE] →
*4 → [NEXT]
*3 → [NEXT] number [NEXT]
→ [VERIFY]
■ STEP 3: Setting device protection
Set a fingerprint or unlock screen method. Tap "Set up fingerprint"/"Set up PIN,
pattern or password" and follow the onscreen instructions. If you do not use
the device protection, operate [No thanks] → [SKIP] → [SKIP ANYWAY].
●Alternatively, after the initial settings, operate from the Home screen, [ ]
→ [Settings] → [Lock screen & security] → [Fingerprint Manager]/
[Screen lock] to set device protection.
■ STEP 4: Data disclaimer
Confirm the disclaimer and privacy policy. Confirm the content and tap "NEXT".
■
STEP 5: Completion of setup
When the setup completion screen appears, tap "FINISH".
■ Setting app info permissions
When you first activate app/function that access the functions or
information of the product, a confirmation screen for requesting access
permission appears.
If such confirmation screen appears, confirm the content and tap "DENY"/
"ALLOW".
●For some apps/functions, an explanation screen for the permission
appear. A confirmation screen may appear in several times and
screen content may vary. Confirm the content and follow the onscreen
instructions.
●If you do not permit, app/function may not be activated or use of function
may be restricted.
●In this manual, description of such confirmation screen may be omitted.
■ Character entry
Use software keyboard to enter characters.
The software keyboard appears when you tap the entry field for registering
a contact, composing a mail, etc.
Software keyboard
With "International keyboard", you can use QWERTY keyboard to enter
characters, Numeric keypad to enter numbers and symbols, and Symbol
keypad for more symbols.
●Tap " " to display Numeric keypad. For Symbol keypad, tap " " on the
Numeric keypad.
●Tap " " to display the keyboard setting menu.
《QWERTY keyboard》 《Numeric keyboard》 《Symbol keyboard》
■ au Easy Setting
Set au convenient functions or services.
●By setting au ID, you can use various services provided by au such as auスマートパス (au Smart Pass) or "au Kantan Kessai", which allows you to purchase
apps from Google Play.
* au ID which is already used by another user cannot be set.
● Alternatively, after the initial setting is complete, from the Home screen, tap [ ] → [Settings] → [au Settings Menu] → [au Easy Setting], you can set au service.
1 2 3 4
[Next] Select "Register [au IDの設定・ Enter a security
"au ID"" → [Next] 保存 (Set/save number → [OK]
au ID)] * Default value is four-
digit number set at
subscription.
8 9 10 11
Select "Turn Auto Select "Activate" or Select "Activate" or Select "Activate" or
"Skip activation" "Skip activation" "Skip activation"
Backup on" or
→ [Next] → [Next] → [Next]
"Turn Auto Backup
off" → [Next]
* The screens of the step from 8 to 12 appear only if "Agree" is selected in the step 7.
* To complete the initial setting of Lookout for au, permit the access authority on the each request screen appeared after the step 11.
Initial settings
When "ようこそ (Welcome)" appears after the product is powered on,
follow the onscreen instructions to set functions and services.
■
STEP START: Starting basic settings
Select "English (United States)" and tap "GET STARTED".
●Tap "日本語 (Japanese)" to switch language.
●Alternatively, after the initial setting is complete, from the Home
screen, tap [ ] → [設定 (Settings)] → [言語と入力 (Language &
input)] → [地域／言語 (Language)] to set the language.
■ STEP 1: Setting Wi-Fi ® connection
Use home wireless LAN (Wi-Fi ® ) or public wireless LAN to connect
Internet service. Operate in a place where signal of Wi-Fi ® network can
be received.
●Wi-Fi ® network with is open network.
●Wi-Fi ® network with is protected by security. To connect, enter
password (security key).
●To detect Wi-Fi ® network manually or make Wi-Fi ® advanced settings,
after the initial setting is complete, tap [ ] → [Settings] → [Wi-Fi] →
[ ] → [Refresh]/[Settings].
5 6 7
Set password Select "Update" Confirm contents
→ [設定 (Set)]
→ [Next] Select "Agree" →
→ [終了 (Exit)]
[Next] → [Agree]
12 13 14
Mark data to be Mark apps to [Finish]
restored → install →
[次へ (Next)] [次へ (Next)]