Table of Contents
Advertisement
• Metering Exposure: Sets the metering method the camera uses to
determine the proper exposure for the picture. Select Matrix (divides
the screen into segments and averages the exposure required for
each segment), Center-weighted (makes an exposure measurement
over the entire screen but bases the result mostly on the center of the
screen), or Spot (takes an exposure measurement only in a small
area at the center of the screen).
• Single Shot Mode: Take and Save (displays each picture on the
screen after it is taken) or Automatic Save (pictures are automatically
saved and the camera returns immediately to Capture mode).
• Shutter Sound: Selects sound for the camera shutter (Shutter1,
Shutter2 or Shutter3).
• Zoom Sound: Turns the zoom sound on and off.
• Brightness Sound: Turns the brightness sound on and off.
• Default Name: Lets you change the default file name.
Press <
> to select a setting. Press <
screen.
Camera Options After Taking a Photo
When Single Shot mode is set to Take And Save, while an image you have
just taken is displayed you can press
Send: Allows you to send the picture in a picture message or to an
online album.
Viewfinder: Returns to the active camera screen so you can take
another picture.
Set as:
• Wallpaper: Sets the picture as your wallpaper for the idle screen.
• Caller ID: Sets the picture as caller ID image for a Contact List entry.
Edit: Opens the Image Editor. Press <Options> to access the following
editing and sharing tools:
•New Image: Lets you open a different file or take a new photo.
> to return to the Settings
to access the following options:
Tools
91
Advertisement
Table of Contents
