Installing The Rtu; Special Notes On Gsm/Gprs Functionality - Adcon A753 User Manual

Installing the RTU
Special Notes on GSM/GPRS Functionality
If ordered, the following items come in separate packaging:
• solar panel with ring clamp
• set of aluminum poles
• LED tool
Make sure you have received all the equipment and read through the
instructions that follow. When you are sure you understand them, you
are ready to install your RTU.
Figure 1 shows the front view of an addWAVE RTU.
As with all wireless communication devices, the higher the transmitter
is installed, the better the communication will be.
The A753 GSM/GPRS RTU is based on a GSM module, which employs a
GSM cellular network to transmit the telemetry data. Before you install
such a device, you must make sure a sufficient signal for proper
operation of the RTU on the site where you plan to use it exists. You
can do this by using a standard cellular phone operated by the same
cellular provider. You can also verify communicatation with the RTU by
calling it as you would a normal cellular phone.
Figure 1. addWAVE RTU
8
CHAPTER 2
Installing the RTU