Changing The Wap Profiles - Samsung SGH-D806 User Manual

Changing the WAP Profiles

You can set up server profiles for the WAP browser.
In Idle mode, press the Menu soft key to access Menu mode.
1.
Select Settings. Highlight Connection Settings and press the Select soft
2.
key or the
Select the profile you want.
3.
For each profile, the following options are available:
Profile Name: enter a name that you wish to assign to the HTTP proxy server.
Home URL: set the address of your startup homepage. When the default
homepage displays, you can delete it using the
choice.
Proxy: place a check in the box to use the proxy server.
IP Address: enter the IP address of the proxy server.
Port: enter a port number or use default setting.
DNS
DNS1
DNS2
Bearer: select the bearer to be used for each type of network address accessed:
GPRS or GSM. The remaining options depend on the Bearer setting.
When the bearer is set to GPRS:
APN: enter the access point name used for the address of the GPRS network
gateway.
Login ID: enter the User ID required to connect to the GPRS network.
Password: enter the password required to connect to the GPRS network.
When the bearer is set to GSM:
Dial Number: enter the PPP server phone number
Login ID: enter the PPP server login ID.
Password: enter the PPP server password.
Data Call Type: select a data call type: Analog or ISDN.
Note: The WAP settings may vary depending on the service provider.
key.
/
OK
: enter the primary DNS (Domain Name System) address.
: enter the secondary DNS address.
key and enter your own
Section 10: WAP 119