Table of Contents
Advertisement
- User name: enter a name to be displayed as the
sender's name in your outgoing e-mails.
- Email address: enter your e-mail address.
- Reply address: enter your e-mil address to be
used when the recipient sends a reply.
- User ID: enter your e-mail ID.
- Password: enter your e-mail password.
- SMTP server: enter the IP address or host name
of the outgoing e-mail server.
- SMTP port: enter the SMTP port number.
- Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
- POP3 server/IMAP4 server: enter the IP
address or host name of POP3 or IMAP4 server.
- POP3 port/IMAP4 port: enter the POP3 or
IMAP4 port number.
- APOP login: connect to the server by using the
APOP login scheme when this option is selected.
- Include attachments: select this option to
receive attachments with e-mails.
- Max. Emails retrieved: set the number of
headers you will retrieve from the server.
- Secure connection: use a secure connections
for e-mail service.
•
Email profile: configure the network settings
required to send or receive e-mails.
Current profile: select a profile.
Profile settings: set up an e-mail profile. The
following options are available for each profile:
- Profile name: enter a name for the e-mail
profile.
- APN: enter the access point name used for the
GPRS network address.
- Login ID: enter the user ID.
- Password: enter the password.
- DNS1: enter the primary address.
- DNS2: enter the secondary address.
•
Block list: specify e-mail addresses or subjects
you want to reject.
61
Advertisement
Table of Contents
