Table of Contents
Advertisement
Access Codes
There are several access codes used by your phone and its SIM card.
These codes help protect the phone against unauthorized use.
When requested to enter any of the codes, enter the code and touch OK.
Except for the PUK and PUK2 codes, access codes can be changed using
the Security menu (see the Security section in "Phone" on page 148).
Important! Avoid using access codes that are similar to emergency numbers, such as 911, to
prevent accidentally dialing an emergency number.
Phone Password
The Lock Phone feature allows you to set a password to protect your
phone against unauthorized use. For instructions, see the Security section
in "Phone" on page 148.
PIN
The 4 to 8 digit PIN (Personal Identification Number) protects your SIM
card against unauthorized use. It is usually supplied with the card.
If you enter an incorrect PIN three times in succession, the code is disabled
and cannot be used until you re-enable it by entering the PUK (see below).
For instructions on activating or deactivating the PIN Check feature and
changing the PIN, see the Security section in "Phone" on page 148.
PUK
The 8-digit PUK (PIN Unblocking Key) is required to change a disabled PIN. If a
PUK was not supplied with your SIM card, contact your service provider.
To re-enable your PIN:
1. Enter the PUK and touch OK.
Getting Started
9
Advertisement
Table of Contents
