Samsung SGH SGH D500 User Manual page 60

• Reject if over: determine the maximum size for
incoming e-mails. Your phone will reject e-mails
that exceed the specified size.
• Leave a copy of messages on the server:
determine whether or not to delete the messages
in the server when retrieve them.
E-mail account
Set up your e-mail account(s) and select the one to be
used:
You cannot change e-mail account settings while an
e-mail is being sent or retrieved. Your e-mail
service provider can give you the information
needed for the below settings.
• Current account: select an account.
• Account settings: configure up to five e-mail
accounts using different e-mail servers. The
following options are available for each account:
Account name: enter a name for the currently
selected account.
In use: select this option to use the account and
to display the account in the Inbox.
User name: enter a name to be displayed as the
sender's name in your outgoing e-mails.
Email address: enter your e-mail address.
Reply address: enter the reply address.
SMTP server: enter the IP address or domain
name of the outgoing e-mail server.
SMTP port: enter the SMTP port number.
Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is POP3:
POP3 server: enter the IP address or domain
name of the server that receives your e-mail.
POP3 port: enter the POP3 port number.
APOP login: connect to the server by using the
APOP login scheme when this option is selected.
User ID: enter your e-mail ID.
Password: enter your e-mail password.
When the protocol type is IMAP4:
IMAP4 server: enter the IP address or domain
name of the server that receives your e-mail.
IMAP4 port: enter the IMAP4 port number.
Retrieve headers: set the number of headers you
will retrieve from the server.
57