Table of Contents
Advertisement
Multimedia Messages
• Send: allows you to send the message. Use
this option when you finish creating the
message. This option is activated after you
add content to the message.
• Save: saves the message in the Draft (Menu
2.3) or Templates (Menu 2.5) box for later
use. This option is activated after you add
content to the message.
• Settings: allows you to change the message
settings. For further details about each setting
option, see page 103. After changing the
settings, you need to press the
the C key to go to back to the options screen.
• Add Destination: allows you to enter
destination numbers or addresses. See steps 7
to 12 starting from page 99. After adding
them, you need to press the
C key to go to back to the option screen.
• Preview: shows your message as it will
display on the recipient's phone.
Note: You can add text, an image and a sound
3. When the added content displays, press the
Down key to highlight Add Here.
4. Repeat steps 2 and 3 until you finish creating
your message.
5. If you want to change the added items, press
the Up or Down key to highlight it and press the
Options soft key. The following options are
available:
Note: The options available are different
98
once for each page.
depending on whether the item you select
on the message screen is a text, an image
or a sound
soft key or
soft key or the
Advertisement
Table of Contents
