Message Alert (Menu 6-3); Connect Tone; (Menu 6-4); Disconnect Tone - Samsung SCH-A612 User Manual

S S o o u u n n d d s s
Vibration+Ring: The phone vibrates and then rings.
Ring+Vibration: The phone rings and then vibrates.
Message Alert
(MENU 6-3)
When you receive a new message, the phone alerts
you. You can set how frequently this happens and
which alert type sounds by using this menu.
If you receive a message during a call, the phone
automatically mutes the ringer and provides a call
waiting tone. This is to avoid ringing in your ear
while you are trying to talk.
Alert Tone
(MENU 6-3-1)
You can set the alert type for the message alert from
Alert Type 1 through Alert Type 5. The Vibration
option vibrates the phone. Selecting Lamp flashes
the service light, but does not sound the message
alert.
Alert Interval
(MENU 6-3-2)
You can set how often your phone alerts you that
there are new received messages, either Once or
Every 2 Mins. Selecting No Alert does not sound
the message alert.
94

Connect Tone

(MENU 6-4)

With this menu Set, the phone sounds a tone when
your call is connected to the system.
To turn the connect tone off, select Release.

Disconnect Tone

(MENU 6-5)

With this menu Set, the phone sounds a tone when
a call is disconnected or dropped from the system.
To turn the disconnect tone off, select Release.

Tone Length

(MENU 6-6)

This menu allows you to select Short or Long
DTMF (Dual-tone Multi-Frequency) tones. DTMF
tones are sent by your phone to access teleservices,
such as a bank account. The system used by the
bank or other service determines if you need short or
long DTMF tones. If the service is digital, as most
are, short DTMF tones will almost always work.
S S o o u u n n d d s s
95