Table of Contents
Advertisement
Screen Layout
Screen Indicators and Buttons
Flash — Camera only — Indicates the flash setting (Auto
1.
shown).
Settings — Touch to open the Camera / Camcorder settings
2.
menu.
Viewfinder — Displays the image currently seen by the
3.
Camera lens.
Thumbnail — Displays the last picture you took with the
4.
Camera or the first frame of the last video you recorded
with the Camcorder.
Mode — Swipe down for Camera mode (as shown), swipe
5.
up for Camcorder mode.
Take / Record / Stop — Takes pictures (Camera) or starts
6.
and stops video recordings (Camcorder).
Camera-Camcorder Settings
To access the Camera or Camcorder settings menu, do the
following:
From the Camera / Camcorder viewfinder screen, touch
➔
Settings. The Camera / Camcorder settings menu
opens with the following available settings:
• Flash mode — Auto / On / Off — Take photos or record videos in
low light conditions.
• Video quality (Camcorder only) — Low (for MMS messages) /
High (for SD card) — Control video clarity and file size as needed.
• Video duration (Camcorder only) — 60 seconds (for MMS) /
10 minutes / 30 minutes — Control video file size as needed.
• White balance — Auto / Incandescent / Daylight / Fluorescent /
Cloudy — Select how the Camera / Camcorder responds to
available light.
• Color effect — None / Mono / Sepia / Negative / Aqua /
Whiteboard — Apply special color effects to your pictures / videos.
• Store location (Camera only) — Off / On — Save location
coordinates where pictures are taken. Lets you Show on Maps
where you took a selected picture. (See "Show on Maps" on
page 50.)
• Picture size (Camera only) — 3M Pixels / 2M Pixels / 1M Pixels
— Control picture size and file size as needed.
Camera–Camcorder
48
Advertisement
Table of Contents
