Resetting Your Phone; Erase All Entry - Samsung SCHR500 User Manual

Remember to always turn your phone on and check for adequate signal strength
before placing a call.
Store Emergency Numbers
In the Settings menu, press
1.
Security. You're prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
Enter the lock code, then press
2.
Press
3.
entries.
Enter an emergency number (up to 32 digits in length).
4.
Press the
5.
Call Emergency Numbers in Lock Mode
In standby mode, enter the emergency number.
1.
Press the
2.

Resetting Your Phone

Reset Phone returns all setup options to their factory default.
In the Settings menu, press
1.
Security. You're prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
Enter the lock code, then press
2.
in the display asking if you wish to restore default settings (except for the
Contacts and Voice Dial).
Press the Yes (left) soft key (
3.
the No (right) soft key (

Erase All Entry

Erase memory erases your Contacts and Photo Gallery. This feature is useful if you
want to give your phone to someone else.
In the Settings menu, press
1.
Security. You're prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
150
def
, , or to select from the three emergency number
abc
def
key to save the number that you entered.
key to place the call.
def
) to return to the Security sub-menu.
def
(for Phone Settings), and
for Emergency #.
def
(for Phone Settings), and
for Reset Phone. A prompt appears
ghi
) to restore default settings or press
(for Phone Settings), and
for
ghi
for
ghi
for
ghi