Table of Contents
Advertisement
10. An Update Existing pop-up screen with a selection list
of entry types displays. Use the up or down navigation
keys to highlight the desired type then press
Edit Contact screen appears in the display with the
number added to the selected entry.
11. Press
Adding Pauses
Calls to automated systems often require a password or
account number. Instead of manually entering numbers
each time, store the numbers to your Contacts along with
special characters called pauses.
•
Wait
: A hard pause stops the calling sequence until further
input from you.
•
2-sec pause
for two seconds and then automatically sends the remaining
digits.
1. In standby mode, enter the number.
2. Press
Wait or 2-sec Pause and press
3. Continue with Step 2, Method 2 of Adding a Contact.
Note: Entering multiple two-second pauses extends the length of a pause.
For example, two consecutive two-second pauses cause a total pause time
of four seconds. Keep in mind pauses count as digits towards the 48-digit
maximum.
78
. "Contact Updated" appears in the display.
: A two-second pause stops the calling sequence
Options use the navigation key to highlight
. The
.
Advertisement
Table of Contents
