Configuration Example For 802.1Q Vlan; Network Requirements; Configuration Scheme - TP-Link TL-SG105E User Manual

Configuring VLAN
5

Configuration Example for 802.1Q VLAN

5.1 Network Requirements

 Offices of Department A and Department B in the company are located in different
places, and some computers in different offices are connected to the same switch.
 It is required that computers can communicate with each other in the same department
but not with computers in the other department.

5.2 Configuration Scheme

 Divide computers in Department A and Department B into two VLANs respectively so
that computers can communicate with each other in the same department but not with
computers in the other department.
 Terminal devices like computers usually do not support VLAN tags. Add untagged ports
to the corresponding VLANs and specify the PVID.
 The intermediate link between two switches carries traffic from two VLANs
simultaneously. Add the tagged ports to both VLANs.
Configuration Example for 802.1Q VLAN
User Guide 53