Table of Contents
Advertisement
•
If you are experiencing frequent problems getting Digit Dial to
recognize you, try adapting it to your voice, which can greatly
improve accuracy. See "Digit Dial Adaptation" on page 159 for
more information.
Use Digit Dial
1. In standby mode, press and hold
"Say a Command" appears in the display, and "Please
say a command." is pronounced through the speaker.
2. Say "Digit Dial". You're prompted to say the number.
3. Pronounce the number naturally and clearly.
The phone may display one or more numbers on the
screen and prompt you for confirmation.
4. If the phone asks "Did you say" followed by the correct
number, say "Yes". The phone dials the number.
5. If the phone asks "Did you say" followed by any
incorrect numbers, say "No".
If there are other choices, the phone prompts you with
them as necessary.
Tip: Choose a number from the list manually. Use the navigation keys to
highlight the number, then press
.
to select.
Section 3: Call Functions
Voice Kit
47
Advertisement
Table of Contents
