AUTO + 300X & 300M Contents • Setting up SmartTech feature • Important Information ▶ Autofeed Technology ▶ Technical Specifications ▶ Points to Note ▶ Warning Symbols ▶ Control Panel and Indicators ▶ Shredding Capability • Function ▶ Jam Free Technology in Manual Feed Slot ▶...
Page 6
Setting up the SmarTech feature for the first time (for Auto+300X) Ensure Bluetooth™ and wireless are enabled on your device. Search for SmarTech shredder to download the app. Standing next to the shredder (1-2 metres), turn the shredder on and open the app. Follow the prompts to set up the app for the first time.
12 min ON / 40 min OFF • In the event of a fault, unplug the unit and contact an Run time from cold 15 minutes authorised GBC service representative for any required Volts / Hz 230V / 50Hz repairs.
Warning Symbols Control Panel and Indicators Keep long hair clear Reverse Auto Continuous Jam Boost Ties and loose clothing hazard Cool Down indicator – This means the machine Keep loose jewellery clear is cooling down. Do not reach into opening Door Open/ Bin Full indicator –...
= 0.9 mm) not to mention the mess it can create. Although the shredder will accept fastened sheets (staples and paperclips), GBC recommend that staples Operation and paper clips are removed prior to shredding to extend the life of the product.
Close the paper loading door. If the Auto+ 300X / 300M is used continuously for over GBC encourages customers to recycle shredded paper. 15 minutes the shredder may overheat and the cool down • Please note that shredded paper cannot be recycled if indicator will flash red ( ).
Guarantee when other types or brands of lubricants are used on any part(s) of this machine. GBC recommend using an oil sheet Operation of this machine is guaranteed for two years from after the bin has been emptied three times (and for ongoing date of purchase, subject to normal use.