Table of Contents
Advertisement
GMRS-1535
4)
Monitoring the channel
It is used for listening the weak signal or to here all activities on the channel by manually
overriding channel code setting.
To activate the Monitor feature
l Press and hold the MON button for over two seconds.
l When you here the sound, release the MON button.
To disable the Monitor feature
l Press and hold the MON button for over two seconds.
5) Auto Channel and tone code(CTCSS) Scanning
This feature allows you to monitor all channels and tone codes(CTCSS) automatically for valid signal.
While scan, you can transmit and receive. It will return to scan mode when receiving is continued during
7 seconds
To activate the Channel Scan
l Press the Scan button
l Radio will begin scanning for all channels.
To disable the Channel Scan
l
Press the
SCAN
l
Radio will return to normal operation.
To activate the tone code(CTCSS) Scan
l Press the Scan button
l Radio will begin scanning for all tone codes(CTCSS).
To disable the tone code(CTCSS) Scan
l
Press the
SCAN
l
Radio will return to normal operation.
6)
Transmitting
l Press and hold the PTT button (The red LED will be illuminated)
l Speak slowly and clearly
l To stop the transmission, release the PTT button
l The unit will go to the stand-by mode
01-02-07
button again
button again
Instruction Manual
- 7 -
Advertisement
Table of Contents
