Samsung SCH R250 User Manual page 121

Note: You can also set your phone to start VoiceSignal when you connect an
optional headset to the phone. (For more information, see "Voice Launch"
on page 122..)
The following voice commands appear in the display:
Call — Call a Contact by saying the name saved in your Contacts list. Call
•
any telephone number, even if not saved in your Contacts list, by saying the
digits in the number. (See "Voice Dialing" on page 33 for more
information.)
Send Text — Lets you access Create Text Message.
•
Send Picture — Lets you access Create Picture Message.
•
Lookup — Lets you find a Contact by name and review the Contact's
•
information.
Go to — Lets you access the following features and functions of your
•
phone: Contacts, Calls, Messages, MetroWeb, @metro, VoiceSVC,
Multimedia, Tools, and Settings.
Check — Lets you say a single command (such as "Status") to verify your
•
phone's: Status, Signal, Coverage, Battery, or My phone #.
Note: Speaking clearly, say the command that you want to use. If VoiceSignal
does not recognize a command, it prompts you to repeat the command. If
VoiceSignal still does not recognized the command, it tells you "Sorry, no
match found" and cancels voice recognition.
Voice Command Tips:
Make sure you wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking on the phone.
•
Voice SVC 117