Table of Contents
Advertisement
Note: Before you can copy files to the memory card from your PC,
you must first insert it into the phone. The phone will format the
card for you and create the necessary file folders. The card is
formatted with a FAT32 file system that can be read by most
computers.
Inserting the Micro SD Memory Card
To insert the Micro SD memory card into your phone:
1.
Open the memory card access panel located on the bottom-
right side of the phone.
2.
Position the Micro SD memory card perpendicular to the
opening and gently slide it into place until it is fully inserted and
locked.
Note: Be sure to use only recommended memory cards (8 MB–512
MB). Using non-recommended memory cards could cause data loss
or damage your phone.
Note: Make sure your battery is fully charged before using the Micro
SD memory card. Your data may become damaged or unusable if the
battery runs out while reading or writing to the card.
Removing the Micro SD Memory Card
To remove the Micro SD memory card from your phone:
1.
Open the memory card access panel located on the bottom-
right side of the phone.
2.
Eject the card by pushing in and then releasing.
3.
Pull the memory card out of the handset.
Warning: DO NOT remove a memory card while files are being
accessed or transferred. It could result in loss or damage of data.
Your Phone 14
Hide quick links:
Advertisement
Table of Contents
