Table of Contents
Advertisement
Note: The following steps outline sending a V-card by going through each
and every option for adding images, sounds, and messages to the V-card.
If you wish to send the V-card without such additional information, press
after step 4.
1. In standby mode, press the left soft key (
then press
A pop-up menu appears in the display with My Name
Card highlighted.
2. Press
to select and send an entry from your Phonebook.
3. If you selected My Name Card, press
screen to send the V-card. The Send To field appears in
the display.
4. Enter a Verizon Wireless phone number or any e-mail
address using the keypad, then press
composer appears in the display.
Note: To enter special characters necessary for an e-mail address, press
the left soft key (
select from a variety of characters.
5. The Add Message field is highlighted. Press the right
navigation key to enter the message composer.
6. Enter a message using the keypad, then press
7. Press the down navigation key to highlight the Add
Sound field.
100
(Phonebook),
to select My Name Card or press
) Option to display a pop-up menu where you can
) Menu,
(Send V-card).
at the next
. The Pix Msg
.
Advertisement
Table of Contents
