Samsung SCH a670 User Manual page 95

MetroA670.book Page 87 Friday, November 12, 2004 12:03 PM
When settings are defined in the camera settings menu
Menu
(
However, when settings are defined while the camera is in
preview mode (preparing to take a picture), the are only
active for the current camera session.
1. In standby mode, press the left soft key (
press ,
2. Use the navigation key to highlight
. You're returned to the Settings menu.
When the flash is set to
the display in camera mode.
Change picture resolution
Change the size (in bytes) of your pictures using the
Resolution setting. Options are High, Medium, and Low.
The camera only takes pictures in Low resolution mode
(regardless of resolution setting) with Fun Frames enabled.
Tip: Change a photo's resolution for the current camera
session (only) using the navigation up/down keys while in
camera mode.
1. In standby mode, press the left soft key (
press ,
display.
High
(VGA 640 X 480)
Medium
(QVGA 320 X 240)
Low
(QQVGA 160 X 120)
, )
, the settings are permanently saved.
, . Off and On
On
, the flash icon (
, . The following options appear in the
) Menu, then
appear in the display.
Off or On, then press
) appears in
) Menu, then
Camera
87