Samsung MyShot II SCH-R460 Series User Manual page 112

Select the desired Language setting and press the OK soft
2.
key to save your selection.
Security
Use the Security menu to lock your phone, set up emergency
numbers, set restrictions, as well as other security options.
Lock Phone
Locking the phone limits all outgoing calls except calls to 911
emergency and the three user-programmable emergency
numbers. You can lock the phone manually during use, or set the
phone to lock automatically when it is turned on. With the phone
in lock mode, you can answer incoming calls, but you must
unlock the phone to place outgoing calls (except to emergency
and secret numbers).
From the Settings menu, select Phone Settings
1.
You're prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
You can change the lock code as needed. (For more information, refer
to "Change Lock Code" on page 109.)
Enter the lock code and press the OK soft key.
2.
Select Lock Phone. The following phone Lock mode
3.
settings appear in the display:
109
• Lock — Locks the phone immediately (The phone stays locked
• Unlock — Unlocks the phone.
• On Power Up — The phone locks automatically the next time your
Select the desired phone Lock mode setting and press the
4.
OK soft key to save your selection.
Change Lock Code
The default lock code for your phone is generally the last four
digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
From the Settings menu, select Phone Settings
1.
You're prompted to enter the lock code.
➔
Security.
Note: The default lock code is the last four digits of your telephone number.
Enter the lock code and press the OK soft key.
2.
Select Change Lock. You're prompted to enter the new lock
3.
code.
Enter the new lock code. You're prompted to re-enter the
4.
new lock code for verification.
until you enter the lock code.)
phone is powered ON (The phone stays locked until you enter the
lock code.)
➔
Security.