Table of Contents
Advertisement
Using Lookup <Name>
You can look up and display contact information for any
person stored in your Contacts list by saying "Lookup,"
followed by the name. (See "Getting Started With Sprint PCS
Voice Command" on page 218.)
To use Lookup <Name>:
1.
Press and hold
2.
Say "Lookup John Smith." The entry information for the
specified contact is displayed.
If you say only "Lookup," your phone prompts you with
"Say the name."
Using Go To <App>
You can open an application or access a menu by saying
"Go To" followed immediately by the destination (either an
application or a menu). (See "Getting Started With Sprint PCS
Voice Command" on page 218.)
To see a list of possible destinations:
1.
Press and hold
2.
Say "Go To" by itself. A list of valid destinations is
displayed and you are prompted with "Please Choose." If
the list is too long to fit on one screen, the screen
displays "Next Menu." You can say the name of a
destination, or say "Next Menu" to view the next screen.
Section 2H: Using Your Phone's Voice Services
.
.
139
Advertisement
Table of Contents
