DAP-1610 AC1200 Wi-Fi Range Extender
User Manual
The RESET and WPS buttons are located on the upper panel of the extender.
Button
RESET
WPS
The device is also equipped with two external non-detachable Wi-Fi antennas.
Bottom Panel
Port
LAN
A button to restore the factory default settings.
To restore the factory defaults, push the button (with the device turned
on), hold it for 10 seconds, and then release the button.
A button to set up a wireless connection (the WPS function).
To use the WPS function: with the device turned on, push the button,
hold it for 2 seconds, and release. The POWER/WPS LED should
start blinking.
Figure 2. Bottom panel view.
An Ethernet port to connect to a computer or a wired router.
Page 11 of 91
Description
Description
Overview