Advertisement
LISTENING...
Earphone Placement
Each earphone is marked with "L" and "R" to indicate the left and right sides of the earphones. Be sure to put them on
correctly to enjoy your audio as originally intended and maximize your personal music experience and fit.
Power & Pairing...
Press the Power Button on the M4U TW1-L for 5 seconds and
1.
release. The LED indicator will quickly blink red and blue when
ready for pairing.
2.
Open the Bluetooth settings on your device and turn on
Bluetooth.
Select the PSB M4U TW1-L from your Bluetooth settings. LED
3.
indicator on the earphone will turn solid blue when paired.
Turn on the M4U TW1-R earphone by holding down the Power
4.
Button for 3 seconds. The left and right earphones will now
automatically sync to one another.
NOTE: The next time the earphones are turned on, they will re-pair and automatically reconnect to the most recent device, if it is in range. Make sure to turn on the
M4U TW1-L first (hold for 3 seconds). Then turn on the M4U TW1-R (hold for 3 seconds).
Re-establishing Wireless Link
1. Forget/disconnect all previously connected Bluetooth devices (i.e. Phone / Tablet) to the earphones.
2. Press and hold the power buttons of both earphones for 5 seconds to turn on and enter pairing mode. Once in pairing
mode the LED will quickly flash red and blue. Release power button. DO NOT connect either earphone to a device.
3. On the left earphone, press and hold the power button to enter search mode (hold for 3 seconds). Once the LED starts
slowly flashing red and blue, release power button and wait 5 seconds. The earphones will establish a connection to e
ach other, and the TW1-L will go back to pairing mode.
4. Now turn off the left earphone by holding the power button (~5 sec). You should notice that the LED on both
earphones will flash red before shutting off.
5. Turn the left earphone back on (hold power for 5 sec). From here, go to your device's Bluetooth settings and select
"PSB M4U TW1-L" from the list. Once it has connected you can turn on M4U TW1-R, (hold power for 3 seconds).
This earphone will automatically pair to right earphone. Turn on your music and enjoy!
Advertisement
