Answering A Call - Samsung GH68-25489A User Manual

"Say a command" appears in the display and is
pronounced through the speaker.
Say "Call".
2.
VoiceSignal prompts you to "Say the name or number."
Speak clearly and say the telephone number of the person
3.
you want to call.
For example, say "7 8 1 9 7 0 5 2 0 0."
If it recognizes the number, Voice Dial repeats it and dials
the number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with "Did you say?" followed by the first
number on the list.
Say "Yes" to confirm the number or "No" to hear the next
4.
one, or use the keypad to select the correct number from
the list. (See "Choice Lists" on page 59, for more
information.)
• Press Repeat to say the name again.
• Press to exit VoiceSignal without dialing.
Pause Dialing From a Contacts Entry
If you voice dial a contact that contains 2-Sec Pause(s) simply wait for
•
the pauses to pass and the dialing to complete.
If you voice dial a contact that contains Wait(s), wait for the appropriate
•
prompt(s) from the number you are calling (credit card number, bank
account number, and so on) and enter the appropriate response(s).

Answering a Call

Incoming
When you receive a call, the phone displays one of the following:
If the caller can be identified, the caller's number (or name if it's in your
•
Contacts) appears in the display.
If the caller cannot be identified, Call from unavailable #, Call from
•
restricted #, or no number appears in the display.
Tip: Assign pictures to Contacts entries. The entry's assigned picture
appears in the display when you receive a call from that entry. (See
"Assigning a Picture to a Contacts Entry" on page 34).
The phone continues to notify you of the call until one of the
following events occur:
You answer the call.
•
The calling party ends the call.
•
The call is sent to voicemail.
•
Call Notification Features
Your phone notifies you of a call in a variety of ways.
Ringing or vibration, depending on your phone's settings.
•
Different ring types or melodies to distinguish callers.
•
Name display with caller ID. (If the caller's name is programmed into
•
your Contacts).
Call Functions 22