Table of Contents
Advertisement
Software Update
Software Update allows your wireless provider to automatically install high-priority
updates on your handset.
Voice Command Settings
Choice Lists
If VoiceSignal is not absolutely confident that it has correctly identified a name or
number, it can display a choice list of up to three possibilities, and prompt you to
confirm the correct one.
You can control when choice lists appear by changing the Choice Lists setting to
Automatic, Always On, or Always Off.
• Automatic: VoiceSignal displays a choice list when it is not confident it has identified
the correct choice from among multiple alternatives.
• Always On: When there are multiple alternatives, VoiceSignal always displays a
choice list.
• Always Off: VoiceSignal never displays a choice list. Instead, the application picks
the best from among the possible choices.
Sensitivity
In VoiceSignal, "sensitivity" controls the balance between rejecting too much, which
means the phone frequently does not recognize names, numbers, or commands,
and rejecting too little, which means it frequently recognizes something even if
nothing was said.
When VoiceSignal rejects an utterance, it displays a message such as "Please
repeat..." or "No match found." If you frequently experience these messages, you
might be able to get better recognition by adjusting the Sensitivity setting toward
Reject Less.
If you frequently experience false activations (VoiceSignal detects a wrong match),
you might be able to get better performance by adjusting the Sensitivity setting
toward Reject More.
Digit Dialing
Use the Digit Dialing menu to adapt digit dialing to your voice.
• Adapt Digits: Lets you adapt digits, which can improve voice recognition of phone
numbers. Adaptation takes about 60 seconds.
• Reset Digits: Erases any digit adaptation you have done and resets digit recognition
to the factory default. If you have not adapted digits, this option is grayed out.
Section 8: Changing Your Settings
76
Advertisement
Chapters
Table of Contents
