Table of Contents
Advertisement
Reply path: allow the recipient to reply to you
through your message centre.
Delivery report: set the network to inform you
when your message has been delivered.
Character support: select a character encoding
type. If you select Auto, the phone switches the
encoding type from GSM-alphabet to Unicode if
you enter an Unicode character. Use of Unicode
encoding will reduce the maximum number of
characters in a message to about half.
If this menu is not shown, your phone provides the
Auto character encoding by default.
Validity period: set the length of time your
messages are stored in the SMS centre.
Message type: set the default message type. The
network can convert the messages into the
selected format.
Service centre: store or change the number of
your message centre.
•
Block number: set up a message filter by
entering phone numbers so that the phone rejects
messages from those numbers.
Multimedia message
(Menu 5.5.2)
You can configure default MMS settings.
•
Send settings: set up the following options for
sending a multimedia message:
Priority: set the priority level of your messages.
Validity period: set the length of time your
messages are stored in the message centre.
Delivery after: set a time delay before messages
are sent.
Address hiding: set your address to be hidden
from the recipient's phone.
Delivery report: set the network to inform you
when your message has been delivered.
Read reply: determine whether or not the phone
sends a read-reply request.
•
Receive settings: set up the following options for
receiving a multimedia message:
Home reception: determine if your phone
retrieves new messages automatically when you
are in your home service area.
57
Advertisement
Table of Contents
