Setting Unique Ring; System; Changing Pin - Samsung DECT-8000 User Manual

Setting Unique Ring

This option allows you to designate a unique ring to signal an
incoming call from a specified call number. You can use this
feature only when the caller's service network transmits the
caller's information.
You can specify 2 callers and select a unique ring tone for
each caller from 6 different tones.
1. Press MENU to display main menu items.
2. Press ❷ (or #) button repeatedly to choose 4: Bell&Beep,
then press OK button.
3. Press ❷ (or #) button repeatedly to choose 5: UniRing,
then press OK button.
4. Press ❷ (or #) button to choose the ring address you want,
then press OK button.
5. Enter the phone number you want to designate, then press OK
button.
6. Press ❷ (or #) button to scan through the ring types avail-
able, then press OK button to save the setting.
7. To return to Standby mode, press
B & B
50
ELL EEP
.

System

PIN (Personal Identification Number) is required to access
System menu.

Changing PIN

The PIN is required when you register handset to a base unit
and use System menu. The PIN is preset to '0000' at factory.
To change the PIN code:
1. Press MENU to display main menu items.
2. Press ❷ (or #) button repeatedly to choose 5: System,
then press OK button.
3. Enter the current PIN code to access the System menu, then
press OK button.
Result: The LCD window dose not display the PIN code you
entered in order to maintain secrecy.
Note: If you enter a wrong PIN code, your phone returns to
Standby mode.
4. Press OK button to access 1: PinChange option.
S
51
YSTEM