Placing a Call Using Voice Dial
To place a call if Voice Dial is inactive:
Open the phone.
1.
Press and hold down the
2.
At the voice prompt, say the name into the phone.
3.
The phone automatically places the call if it recognizes the name.
If the phone does not recognize the name, it says
like to call?
If the phone is unable to recognize the name after two attempts, it
says
recognize name. Please check name
automatically to standby mode, and you can try the call again later.
Reviewing Voice Dial Entries
To review Voice Dial entries:
From the
1.
Press
2.
numbers displays (the names also display if stored in the Internal
Phone Book).
Press the associated key to select the desired entry, or scroll to the
3.
desired entry and press
can scroll through entries without having to listen to each one, or
you can listen to them all as they play in order.
Press
4.
Section 14
86
Using the Voice Services of Your Phone
again and prompts
The name cannot be recognized
Main Menu
for
Review
to return to the previous screen.
key.
Locating Name.
press
for
Voice Dial
. A list of your stored voice dial
. The recorded name plays audibly. You
Who would you
and prompts
Cannot
. The phone returns
.