RocketFish RF-G1603 Quick Setup Manual

PACKAGE CONTENTS FEATURES
• HDMI splitter • Supports 3D video
• Supports up to 4K UHD
• AC power adapter
• Supports 18 Gbps bandwidth
• Quick Setup Guide
• Compatible with most TV's, projectors and
video displays with HDMI inputs.
You will need:
• Gold-plated connectors for maximum signal
• High-speed HDMI cables, such as
transfer and corrosion resistance
Rocketfish, available in multiple
• Supports HDMI CEC commands for remote
lengths.
control functionality
Note: Using this product with 4K video
will require the use of 18 Gbps • Wall-mountable with integrated key-hole
bandwidth cables for best performance.
slots (hardware not included).
HDMI SPLITTER BASICS
This Rocketfish two-way HDMI splitter will send HDMI audio and video signals from a single
source, such as a Blu-ray/DVD player or cable/satellite box, to two destinations, such as a TV
and an AV receiver. It is ideal for sending the audio signal from a 4K source to an AV receiver
(one that does not support 4K video pass-through), and video signal to a 4K UHD TV.
Front
Power LED
Back
HDMI OUT 1 HDMI IN HDMI OUT 2
OUTPUT1 INPUT OUTPUT2
Before using your new product, please read these instructions to prevent any damage.
SETTING UP YOUR HDMI SPLITTER
1 Connect one end of a high-speed HDMI cable (not included) to your video source and the
other end to the INPUT port on the HDMI splitter.
Blu-ray player
2 Connect one end of another high-speed HDMI cable to your HDMI splitter's OUTPUT1
port, then connect the other end of the HDMI cable to the IN port of a destination
component, such as an AV receiver, projector, or HDTV.
3 Connect one end of another high-speed HDMI cable to your HDMI splitter's OUTPUT2
port, then connect the other end of the HDMI cable to the IN port of another destination
component, such as an AV receiver, projector, or HDTV.
4 Connect the included AC adapter to the Micro USB jack on the HDMI splitter and a
standard 120V AC outlet. The LED indicator lights white. Turn on all connected devices and
operate. It is not necessary to unplug the unit. You can leave it plugged in.
Connecting one component to a display and AV receiver or projector
Micro USB
5V/1A
Game console
OR
Blu-ray player
Cable/satellite
HD TV
Game console
OR
Micro USB
HDMI HDMI
OUTPUT1 INPUT OUTPUT2
Projector
OR
AV receiver
Micro USB
box
HDMI HDMI HDMI
OUTPUT1 INPUT OUTPUT2
QUICK SETUP GUIDE
RF-G1603/RF-G1603-C
SPECIFICATIONS
HDMI version 2.0b
Video signal bandwidth 18 Gbps
Resolutions supported 480i to 2160p (4K UHD) / 60Hz from source device
HDMI HDCP Compliant with HDCP 2.2
Power 5 VDC / 1000 mA (5 W max) Micro USB
Dimensions 3.94 × 3.41 × 1.06 in. (100 × 87 × 27 mm)
TROUBLESHOOTING
Symptom Possible solution
Power LED is not on Make sure that the HDMI splitter's power adapter is plugged in.
Video has • Make sure that you are using high-speed HDMI cables for all
interference connections.
• Make sure that the TV's video resolution supports the video
source's output resolution.
No video and/or • Make sure that the audio and video formats of the content
audio being used (such as Blu-ray disc) are supported by all
connected devices.
• Make sure that your destination components (such as TV and
AV receiver) are set to the correct HDMI inputs.
• Make sure that you are using High-Speed HDMI cables for all
connections.
• Very long length of cables (over 20') may cause a loss of video
signal or downgrade to lower resolution. Use a shorter cable, if
possible.
• Unplug the HDMI splitter's AC power adapter, then plug it back
in again.
, 4K HDMI Splitter