Advertisement
Installation Guide
■ STH-160PO (Outdoor Housing), STH-160PI (Indoor Housing)
STH-160PI is the same as STH-160PO except for the fan and heater.
1. With STB-270PW, the wall mounted bracket, fix the bracket
to the intended location using four screws.
Cautions
·Pull the connection cable out of the bracket
through the hole in advance.
2. Connect cables to the video cable terminal and controller
cable terminal on the circuit board of the mounting bracket.
3. Connect the power cable for the fan heater (Outdoor
Housing).
4. Fix the mounting bracket and housing using three screws.
5. Fix the housing to the wall mounted bracket using three
screws.
Cautions
·For fixing the circuit board, match the lock screw
part with the direction of the housing sticker.
6
SPEED DOME CAMERA ACCESSORIES
Video Cable
Controller Cable
Power Cable
Mounting Bracket
Power Adapter Cable
6. Fit and turn the Speed Dome Camera into the slot, locating it
in the direction marked on the mounting bracket, and fix it
using the rotation control screw.
7. Connect the circuit board to the connector of the Speed
Dome Camera as shown in the figure.
Cautions
·When using the outdoor or indoor housing,
remove the dome cover of the Speed Dome
Camera for clearer images.
8. Fix the external cover to the housing using four screws.
7
SPEED DOME CAMERA ACCESSORIES
Advertisement
