Customer Engineer (Ce) Loadable Diagnostics - IBM 6580 Product Support Manual

Customer Engineering (CE) Loadab!e Diagnostics are on the
CE Diagnostic Diskette. They include;
• MAP Diagnostic Integration (MOil
• CE Utilities
• System Exerciser
• Load Progra m
To cause a soft !PL when the Task Selection Menu is
displayed:
• Remove all diskettes from the Diskette Unit.
• Hold the CONTROL KEY (Position 3) down and press
the RETURN KEY.
• Press ENTER.
When the CE diagnostic diskette is loaded, the program
loads, and the Function Selection Menu is displayed.
MDI RUN TIME OPTlQNS MENU
10 ITEM
Mode
Section
c Subsection
d Start on Step
e End On Step
f Stop On
YOUR POSSIBLE
CHOICE CHOICES
1 l"'Run,
2~Step,
3-Loop
90 10·95
70 70 - 89
oat
001 - 031
031 001 - 031
o
O-Don't Stop, l.,Yes. 2"'No,
Type 10 letter to choose Item, press ENTER
CE DIAGNOSTICS
FUNCTION SELECTION MENU
ID ITEM
MOts
Utilities
System EKerciser
Load Program
Type ID letter \0 choose
Item, Press ENTER
MOl DEVICE SELECTION MENU
10 ITEM
Display Module
Keyboard Module
Electronics Module
Diskette Unit
Printer
Shared Resource (Primary)
Shared Resource (Secondary)
Paper Handling
Mag Card Unit
Communications
Type 10 letter to choose
Item, press ENTER
CE Loadable Diagnostic Flowchart
DIAGNOSTICS - Loadable Diagnostics
-93-
CE DIAGNOSTICS
FUNCTION SELECTION MENU
ID ITEM
MOls
Utilities
System ExerCiser
Load Program
Type 10 letter to choose
Item, press ENTER
10 ITEM
Error Log
6380 Head Alignment
Compatibility Check
FESN/RVM
Communications
Type 10 letter to choose
Item, press ENTER
ERROR lOG UTILITY DEVICE SELECTION MENU
10 ITEM
Diskette Drive L Error Log
Diskette Dnve R Error Log
Printer Error Log
Keyboard Error Log
Display Error Log
Mag Card Error Log
Press CANCL to return to Utility Group Selection
Menu. Press END to return to Function Selection
Menu. Type 10 letter to choose Item, press ENTER.
Load Program
Function Display
Insert desired program
diskette, press ENTER