New Device; New Device Configuration - Huawei P20 User Manual

New Device

New Device Configuration

Connecting to the Internet
Connect to Wi-Fi networks effortlessly with your device.
Connecting to a Wi-Fi network
1
Swipe down from the status bar to open the notification panel.
2
Touch and hold
3
Switch on Wi-Fi. Your device will list all available Wi-Fi networks at your location.
4
Select the Wi-Fi network you want to connect to. If you select an encrypted network, you will also
need to enter the Wi-Fi password.
Connecting using mobile data
Before using mobile data, ensure that you have a data plan with your network provider to avoid
incurring excessive data charges.
1
Swipe down from the status bar to open the notification panel.
2
Touch to enable mobile data.
When you don't need to access the Internet, disable mobile data to save battery power and
reduce data usage.
Enrol a Fingerprint
You can enrol a fingerprint on your Phone and then use your fingerprint to unlock your screen or
access your Safe or App Lock without a password.
Fingerprint unlocking is only available when your unlock method is set to Pattern, PIN or
l
Password. You will be required to unlock your Phone using the screen unlock password after
the device is restarted or if your fingerprint is not recognised.
Before enrolling a fingerprint, make sure your finger is clean and dry.
l
1
Open Settings.
2
Go to Security & privacy > Fingerprint ID, select Pattern, PIN, or Password, and then follow
the onscreen instructions to set an unlock password.
3
Once you have set an unlock password, touch New fingerprint to enrol a fingerprint.
4
Place your fingertip on the fingerprint sensor. Press down lightly on the sensor until your device
vibrates. Repeat this step using different parts of your fingertip.
5
After enrolment is complete, touch OK.
To unlock the screen, simply place your fingertip on the fingerprint sensor.
to open the Wi-Fi settings screen.
14