troubleshooting
Connecting to a computer
Symptom
When using the videos,
a computer does not
recognise your camcorder.
Cannot play a video clips
properly on a PC.
Intelli-studio does not
function properly.
The image or sound on your
camcorder is not played on
your computer properly.
The playback screen is
paused or distorted.
124_English
Disconnect the USB cable from the computer and camcorder, restart the
•
computer, then reconnect it correctly.
A video codec is needed to play the file recorded on your camcorder. Install or run
•
the built-in edit software (Intelli-studio).
Make sure you insert the connector in the correct direction, and connect the USB
•
cable to the USB jack on your camcorder firmly.
Disconnect the cable from the computer and camcorder, restart the computer.
•
Reconnect it properly.
Your computer may not have the required performance to playback a video file.
•
Check the recommended computer specifications.
Exit the Intelli-studio application, and restart the Windows computer.
•
The built-in software on your camcorder, Intelli-studio, is not Macintosh-compliant.
•
•
Set "PC Software" to "On" in the Settings menu.
According to your computer type, the Intelli-studio program may not run automati-
•
cally. In this case, open the desired CD-ROM drive that has the Intelli-studio program
in My Computer and run iStudio.exe.
Video playback or sound may stop temporarily depending on your computer.
•
The video or sound copied to your computer is not affected.
•
If your camcorder is connected to a computer that does not support Hi-speed
USB (USB2.0), the images or sound may not be played back correctly.
The images and sound is copied to your computer is not affected.
Check the system requirements to play a video.
•
Exit all other applications running on the current computer.
•
If a recorded video is played on your camcorder connected to a computer, the
•
image may not play smoothly, depending on the transfer speed. Please copy the
file to your PC, and then play it back.
Explanation/Solution
page 97