Panasonic CZ-RTC5B Operating Instructions Manual page 29

Circulation
5
Only when ECONAVI is off, select
[YES].
◄ ► →
6
Select [Setting for all units] or
[Settings for individual units].
▲ ▼ →
7
Set.
„ Setting for all units
▲ ▼ → →
„ Settings for individual units
▲ ▼ → ► → ▲ ▼ →
Note
z To operate the "Circulation" in HEAT mode, set the fan speed
to [AUTO], and set the airflow direction to any one of [Direct
airflow], [ ] and [F3, F4, F5].
z In the following cases, each message appears and this function
cannot be used.
• When the indoor unit is not supported,
the motion sensor is not equipped,
or the floor temperature sensor is not
equipped
(Press 2 times to finish.)
→
(Press 2 times to finish.)
ｽｲﾝｸﾞ 停止
• Locked or prohibited
ON
OFF
ON
OFF
F1
F2
F3
F4 F5
29
(EN)