Part Names And Functions - Mitsubishi PLH-3AK.UK Technical & Service Manual

2

PART NAMES AND FUNCTIONS

Indoor Unit
Horizontal Air Outlet
Sets airflow of horizontal automatically
during cooling or dehumidifying.
Remote controller
On the controls are set, the same operation mode can be repeated by simply pressing the ON/OFF button.
Operation buttons
button
This switches between continuous
operation and the timer operation.
button
Press this button to switch the cooling,
electronic dry (dehumidify), automatic
and heating modes.
TEMP. button
This sets the room temperature, The
temperature setting can be performed
in 1°C units
Setting range
Cooling 19°C to 30°C
Heating 17°C to 28°C
This model name of the remote con-
troller is indicated.
Air Intake
Intakes air from room.
button
This sets the current time. start
time and stop time.
button
This switches the horizontal fan
motion ON and OFF.
(This button does not operate on this
model)
3
Filter
Removes dust and pollutants
from intake air
button
This sets the ventilation fan
speed.
FILTER
CHECK MODE
TEST RUN
CHECK-TEST RUN button
Only press this button to per-
form an inspection check or test
operation, Do not use it for nor-
mal operation.
Grille
Auto Air Swing Vane
Disperses airflow up and
down and adjusts the angle
of airflow direction.
ON/OFF button
This switches between the operation
and stop modes each time it is
pressed. The lamp on this button
lights during operation.
button
This adjusts the vertical angle of the
ventilation.
FILTER button
This resets the filter cleaning indica-
tion display.